Filter
Top Products
_ Press the MENU
button, then press the
CH(annel) A/V buttons to
select VOLUME BAR,
TO ADIUST pI_ESS_ I )_
CHA_NEL
• Hff buttons so that ON or
OFF besideVOL- {[_R_
repeatedly to pick the
amount of time (30 minutes to
120 minutes) before the TV
turns itself off.The length of
time will appear on the screen.
One minute before theTV
shuts itself off, the seconds will
count down on the screen.
GOOD NIGHT appears on the
TV screen 10 seconds before
the TV shuts itself off.
.®So
E3 C3 Cg
_3 Ci3G3
r_ G3 CD
C3G
To see how
many minutes remain
before the T_/shuts
itself off, press the
SLEEP button once.
To cancel a SLEEP
TIMER setting, press
the SLEEP button
repeatedly until SLEEP
0 MIN appears on the
screen.
watchinginappropriate material
onT_ SmartLock n_adsthe ra_-
ings for programming (except
_r newsand spor_ programs,
nedeted movies on premium
cable channels, and Emergency
Broadcast System _gnais), then
denies access to programming if
the program's rating meets or
exceeds the limitations you
select. To black speci_c ratings,
follow these steps,
ton, then press the
CH(annel) A/V buttons to
select SMARTLOCK.
Then, press theVOL(ume)
• button,
EXIT
RIGHTNESS
PICTURE
_Press the CH(annel)
A/V buttons to select
Movie Ratings or
Parental Guidelines.
Then, press the
VOL(ume) • button.
_T BLOCK 1
paren_l G_ld_li_s
SEUECT_,v CHOOSE _-
O END PRESS EXIT
RATING EXPLANATIONS
• V-_olence
• S-Sexualsituations
• L-Language
• D.Inappropriate dialogue
• F_-Fantasy_iotence may
E_ghtenchild_n under
seven;'rv-Y7 category onl_
Some cartoons may have
this rating.
• TV-Y - Appropriate for all
children.
• TV-¥7 -Appropriate for chil-
dnm sevenand olden
•TV-G - General Audience
• TV-PG - Parental Guidance
suggested.
• TV- 14 - Unsuitable for chil-
dren under 14,
• TV-MA - Mature audience
onl_
_Press the MENU but-
ton, then press the
Cl-I(=nnel) _ buttons to
select SMARTLOCK.Then,
press theVOL(ume) • but-
ton.
_IGHTN_
_er but-
tons to enter your access
code. The default code is071 I.
If you have not set up your per-
sonalaccesscode, you should
Jse071 I.
_H(annel)
_IV buttons to select
BLOCK.Then, press the
VOL(ume) • button.
$MAEILOC K 1
• BLOCK
CHANGECODE
SELECT _V CHOOSE_
O EN_ p_E_5_XIT
_ Press the CH(annel) _ld_ buttons to select the rating
Iyou want to block.Then, press theVOL(ume) • button so
that ON appears beside the rating.
For example, if you set PG to ON, you may not view PG program-
_ing because the block is on, Programs with a PG or higher rating will
blocked.
MO_qEP,ATINGS
• G [OFF] > _.y [OF_
PG [_ffl I_Y7 •
_ [OFF]
_.HA >
SELECT_V CHOOSE _. SE_CT _"_ CHOOSE p.
More specific ratings are av'aibble for TV-y7,TV-PG,TV-14, and TV-
MA.When you press theVOL(ume) • button to turn ONTV-Y7,
TV-PG,TV- 14 or TV-MA, additional ratings will appear. Press the
CN(annel) _/V buttons to select a specific rating.Then,
press t_eVOL(ume) • button so that ON appears beside
the rating. If you select the rating category and turn it on or off.
the specific ratings will turn on or off automatically. But, you can
always turn specific ratings on or off by selecting them individually.
_Press the STATUS/EXIT button.
]
_ _the Number buttons ___
to e_ter your old access code. If enter your desired access code in
you havenever set upyour person- the New Code space.Then, enter
al access code, use 071 I. the same code in the Confirm
Code space.
select CHANGE
CODE. Then, press the
• button.
_.MARTLOCK
BLOCK
__> CHANGE CO_E
Your new access code should be
recorded.You will return to the
SMARTLOCK menu.
Press the STATUS/EXIT but- I
on.
Try it out.
Press the
VOL(ume) _'/_1
buttons.TheVOL-
UME BAR should
appear on the
screen.
To avoid delays in
Closed Captioning
when you adjust or
mute the Volume,
set the VOLUME
BAR to OFE
[o ch_k the lie
_martLock sennas,
_ress the MENU but-
;on, then press the
gH(anne D_ but-
_ns to select REVIEW.
Press theVOL(ume) il_
_utton so that the
_mar__ock sethngs
_ppea_Ratings that are
_locked will appear on
d_escreen.An "X" will
_ppear ira specific rac-
ng is blocked, such asV
_orViolence in the TV-
14 categor_
If the "Incorrect Access
Cod_ .? message
_ppears after step 2,
Enter the eorrec_
ICCeSS code. t_ order U
_rote_t th_ privacy of
the accesscode, an X
will appee.r on the
screen instead of the
_uiTib_r you entre
A "CHANNEL XX
BLOCKEE_Y message
will appear when some-
one tries to accessthe
blc_ked programming. If
you want to view this
programming, enter
_'our accesscode.The
channel will remain
blocked until you enter
the correct code. If you
do not know the code,
you will have to select
another channel.When
you turn ofi the T_/
once, the programming
isblc_knd ag_n.
use the default code
after you set up
your personal access
code.
To restore 0711 as
your persona[ access
code, unplug the
TV's power cord for
10 seconds, then
plug it in again.
-_P-reSs the MENU
button, then press the
CH(annel) A/_ buttons to
select a control.
TOADJUST P_E_I/_
_ESS nlllll==lu.
PICTURE • •
COLOK
TINT
SNA_PN_
_S Press theVOL(ume) •/_1 buttons
until the darkest parts of the picture are as bright as
you prefer.
Press theVOL(ume) •/_1 buttons until
the lightest parts of the picture show good detail,
COLOR Press theVOL(ume) •/_1 buttons to add
or reduce colo_:
Press theVOL(ume) •/_1 buttons to obtain
natural skin tones.
Press theVOL(ume) II_/_l buttons
to improve detail in the picture.
__(ume) _
sl_ei/ec_te_dUpitteaunrSetcOoandtJrUSt the ] [STATUSIEXIT button.
0 ©
(SD
To reset the pic-
ture controls to the origi-
nal factory settings, press
the MENU button, then
press the CH(annel) _/_
buttons to selectTV
RESE_ Press the
VOL(ume) • button.TV
RESET COMPLETED will
appear briefly on the
screen.
_tosed Captioning allows you
o read the voice content of
television programs on the TV
screen.Designed to help the
hearingimpaired,this feature
useson-screen text boxes to
show dialogue and conversations
while the 73/program is in
fir0gress.
Note: _roadcast stations will
often use spelling abbreviatJons,
_ymbols.dropouts and other
grammatical shortcuts inorder
_okeep pace with the on-screen
action.These factors vary with
the source of the captioned text
material and do not indicate a
need for TV service.
button, then press the
CH(annel) AI_ buttons to
select CAPTION.
TO ADJUST P_ESS _1/_
IVOLUME BA_
CHANNEL
I iN_AML'_M_LOCK
f
O O
Press the VOL(ume)
• /'el buttons to select a
Closed Caption mode, for
_=xampleCAPTION I.
_Jote: Usually CAPTION I is
:he preferred mode for viewing
:aptioned material.
CAPTION I or 2 modes: dia-
ague (and descriptions) for the
_ction on the captioned TV pro-
;ram shows on the screen.
rEXT I or 2 modes: only a
_lack box appears on theTV
screen. If the TEXT mode is
active, text or information will
lappear.
STATUSIEXIT button.
Closed Captions will appear if
they are available for the cur-
rent program.
I
Closed
Captions will be
delayed briefly when
you mute or adjust
the volume, change
channels, or press
the STATUS/EXIT
button to see the
current channel
numben Closed
Captions will not be
delayed when you
mute or adjust the
volume if you set
tfieVOLUME SA_
to OFE Details are o
page 6.
To cancel Closed
Captions, set CAP-
TION to OFF at
step 2.
Notes:
• Captions and texts may not match the T_/voice broadcast exactly.
• Interference may cause the Closed Captioning system to function
improperly.
• The caption or text characters will not appear if the menu is on the
screen,
Remember, not all TV programs and commercials are broadcast with
Closed Captioning. Neither are all Closed Caption modes necessarily
being used by a broadcast station during the transmission of a pro-
gram. Refer to your area's TV program listings for the stations and
times of shows with Closed Captioning.
If a buck box appears on the screen, your TV is set to a TEXT mode.
To remove the black box, selec_ CAPTION I. CAPTION 2. or OFF at
step 2 above.
Coaxial Cable - A singlecable with a metal connector that screws (or pushes) direct-
ly onto a 7fi(_ jack (ANT(enna) In jack) on the Tdevision orVCR.
Display -Allows the user to quickly confirm what channel number is being viewed cur-
rendy.
Jack Panel - The area on the back of the T_
Menu - An on-screen listing of features that are availablefor adjustments.
On-screen Displays (050) -The wording or messages that help you set up features
(color _djustment, channel setup,etc.).
Programming - Adding or deleting channelsin the _elevision's memory.The television
"remembers" only the locally available or desired channel numbers and skips over any
unwanted channel numbers.
Reminder - Continuouslydisplaysthe current channelnumber on theTV screen.
Remote Sensor - A window or opening on the front of the TV through which remote
control signals are received.
Twin Lead Wire -The two-strand 300_ antenna wire used with many indoor and
outdoor antenna systems. In m_ny cases,this _pe of antenna wire requires anadditional
adaptor (or balun) in order to connect to theANT(enna) In jack on theT_
Volume Bar - Appears on theTV screen when you adjust the volume.