Filter
Top Products
ou can view the playback of
VCR tapes (Video Disc
Players, camcorders, etc). by
using the AUDIO and VIDEO
INPUT jacks (on the rear of the
TV).
For example: to view the
playback of a VCR tape:
<_ Connect the VIDEO and
<__ AUDIO IN(put) jacks on the
TV to the AUDIO and VIDEO
OUT(put) jacks on the VCR.
Press the MENU (M) button
on the remote, then press the
CHANNEL • or • buttons (or
the MENU • or • buttons on
the TV) to select the word
INPUT with the TV's on-screen
Arrow.
Note: You can press the
CHANNELA• buttons to select
"VCR/AUX" (if it has been
added to the TV's channel
memory.) See page l0 for details.
<_ Press the VOLUME (+) or (-)
I utton to select the
VCR/AUX(iliary) INPUTS on
the rearof the TV.
Turn the VCR ON and PLAY
the VCR tape to be viewed on the
TV.
ieltlclllbei, whcii ,you'ic
ti through using the AJV
INPUT jacks, return the INPUT
display screen on the TV to
ANTENNA. If you leave the TV
in the VCR/AUX INPUT mode
and there is no signal source
connected to the jacks, you will be
seeing only a blank screen on the
TV.
NOTE: If you have a mono
(single audio OUTPUT) VCR,
"Y" Connectors are available
(from your dealer or Parts
Information Center 1 800 292-
6066) to connect to the audio
inputs on the TV.
PICTURE AND SOUND FROM
PLAYBACK OF VCR TAPE
[ STfi I_..q0
17
VIDEO IN
(YELLOW)
VCR
(EQUIPPED WITH VIDEO AND
AUDIO OUTPUT JACKS)