Filter
Top Products
Page 4
Your DSM-4S is ready to use straight out of the box. How to connect your meter is illustrated below.
Note: Always make all of your connections prior to switching your DSM-4S on.
LNB
LNB IN
For the easiest method of connection disconnect the cable from the LNB on your dish and connect this to
the Set Top Box (receiver symbol) connector on your DSM-S4. Then use the short F cable supplied with
your DSM-S4 to connect your LNB (dish symbol) connector to the LNB as shown above.
After your connections have been completed ensure that your set top box is switched on with any channel
selected. Tip: Ensure that the F connectors are hand tight and not loose (good connections are essential).
Manhattan
CONNECTIONS