Filter
Top Products
Page 9
DOWNLOADS
To update or load your selected satellite file to your DSM-4S meter connect your meter via USB to your PC.
The USB port is located on the lower right side of the casing.
On connecting the DSM-4S to your PC the LCD will flash a
few times and settle into program mode after a few seconds
(as shown in the diagram on the right).
Program mode
Double click the target style icon to open the
loading program and follow the steps below.
Click T
ransfer
Program mode: busy
While the data transfer is taking
place the LCD text will indicate that
the NanoSat is “busy” receiving data.
On completion the LCD
text will indicate “done”
Program mode: done
Click “OK” and disconnect the DSM-4S
from your PC your meter is now ready for
use with the selection you downloaded.
Manhattan