Filter
Top Products
14
Connections
ENGLISH
Connections
ENGLISH
Introduction Connections Playback Function Setup Others
• If “BD Audio Mode” is set to “HD Audio Output” or the BD title does not have secondary or
interactive audio, the audio will be output as shown in the table.
• If the “BD Audio Mode” is set to “Mix Audio Output” and the BD title has secondary or interactive
audio, the audio will be output as follows:
*
1
Dolby Digital or Multi PCM (Only the independent substream is decoded.)
*
2
Dolby Digital or Multi PCM (Only the Dolby Digital substream is decoded.)
*
3
DTS or Multi PCM (Only the core substream is decoded.)
*
4
As shown in the table (Only the independent substream is decoded.)
*
5
As shown in the table (Only the Dolby Digital substream is decoded.)
*
6
As shown in the table (Only the core substream is decoded.)
• If the connected device is not compatible with the HDMI BITSTREAM, audio will be output as Multi
PCM or 2ch Downmix PCM depending on the capability of the connected device, even if you select
“HDMI Multi(Normal)” in“HDMI Audio Out” setting. Refer to page 33.
* HDMI: High-Definition Multimedia Interface
Ⅵ Audio signals output from DIGITAL OUT (COAXIAL)
When both HDMI and DIGITAL OUT is connected to other devices, the audio signals currently output
from the HDMI OUT will be output from the DIGITAL OUT jack as well, except that HDMI 2ch signal
will be output from HDMI OUT jack, when connected device does not support Dolby Digital and DTS.
< When HDMI is not connected or “Audio Mute” is selected···>
When HDMI is not connected or the “Audio Mute” is selected in “HDMI Audio Out” setting, the audio
signals output from DIGITAL OUT changes depending on the “Digital Out” setting. Refer to the
following table.
To set “Digital Out”, press [SETUP], then select “Quick” A “HDMI Audio Out” A “Audio Mute” or
“Custom” A “Audio” A “HDMI Audio Out” A “Audio Mute”.
• This table applies only when HDMI is not connected or the “Audio Mute” is selected in “HDMI Audio
Out” setting.
• If “BD Audio Mode” is set to “HD Audio Output” or the BD title does not have secondary or
interactive audio, the audio will be output as shown in the table.
• If the “BD Audio Mode” is set to “Mix Audio Output” and the BD title has secondary or interactive
audio, the audio will be output as follows:
*
1
Only the independent substream is decoded.
*
2
Only the Dolby Digital substream is decoded.
*
3
Only the core substream is decoded.
Copyright protection system
To play back the digital video images of a BD/DVD via an HDMI connection, it is necessary that both
the unit and the display device (or an AV amplifier) support a copyright protection system called
HDCP (high-bandwidth digital content protection system). HDCP is copy protection technology that
comprises data encryption and authentication of the connected AV device. This unit supports HDCP.
Please read the user guide of your display device (or AV amplifier) for more information.
Note
• When using HDCP-incompatible display device, the image will not be viewed properly.
• The audio signals from the HDMI jack (including the sampling frequency, the number of
channels and bit length) maybe limited by the device that is connected.
• Among the monitors that support HDMI, some do not support audio output (e.g. projectors). In
connections with device such as this unit, audio signals are not output from the HDMI output jack.
Digital Connection to an AV Amplifier with Built-in Decoder
2ch AUDIO OUT
LR
AC IN
SBR
FR
SW
7.1ch AUDIO OUT
C
FL SL SBL
SR
RS-232C
STRAIGHT
CABLE
FLASHER
OUT
IN
VIDEO OUT
COMPONENT VIDEO OUT
DIGITAL OUT
COAXIAL
HDMI OUT
NETWORK
COAXIAL
DIGITAL AUDIO INPUT
DIGITAL OUT
COAXIAL
audio
this unit
digital audio coaxial cable
digital audio coaxial
input jack
Disc type Audio recording format “Digital Out” setting
Bitstream LPCM
BD-Video
Dolby Digital Dolby Digital 2ch Downmix PCM
Dolby Digital Plus Dolby Digital
2ch Downmix PCM*
1
Dolby TrueHD Dolby Digital
2ch Downmix PCM*
2
DTS DTS 2ch Downmix PCM
DTS-HD DTS
2ch Downmix PCM*
3
PCM 2ch Downmix PCM 2ch Downmix PCM
DVD-Video
Dolby Digital Dolby Digital 2ch Downmix PCM
DTS DTS 2ch Downmix PCM
PCM 2ch PCM 2ch PCM
DTS-CD DTS 2ch Downmix PCM
AVCHD
Dolby Digital Dolby Digital 2ch Downmix PCM
PCM 2ch Downmix PCM 2ch Downmix PCM
DivX
®
Dolby Digital Dolby Digital 2ch Downmix PCM
MP3/ MP2 2ch PCM 2ch PCM
audio CD/ MP3/ Windows Media™ Audio 2ch PCM 2ch PCM
Note
• In order to output PCM signal from DIGITAL OUT jack while outputting the HDMI audio signal,
set “BD Audio Mode” to “Mix Audio Output” and set “HDMI Audio Out” to “HDMI Multi(LPCM)”.
Cables not included.
Please purchase the necessary cables at your local store.
E5KB0UD_v3_EN.book Page 14 Tuesday, June 30, 2009 11:21 AM