Marantz DV4200 DVD Player User Manual


 
PAGE 12 CONNECTIONS
Connecting to a TV
Connect the DVD player to your TV.
VIDEO
OUT
VIDEO
OUTPUT
L
R
S-VIDEO
OUT
C
R
C
B
COMPONENT
VIDEO OUT
COAXIAL
DIGITAL
OUT
AUDIO
OUT1
AUDIO
OUT2
L
R
REMOTE
CONTROL
IN
OUT
S-VIDEO
COMPONENT
Y
S-video cable (not supplied)
To S-VIDEO OUT
To COMPONENT
VIDEO OUT
To AUDIO OUT (L/R)/VIDEO OUT
Audio/Video cable (supplied)
To video input To audio inputs
Video cable (Y, C
B, CR) (not supplied)
To S-video input
TV or monitor with
audio/video inputs
VIDEO OUTPUT
SELECT switch
Refer to the owners manual of your TV as well.
Before you connect the DVD player to your TV, be sure to turn off the power and unplug both units from the wall outlet before
making any connections.
Connect the DVD player to your TV directly. If you connect the DVD player to a VCR, the playback picture will be distorted
because DVD video discs are copy protected.
Warning
Do not set the Digital Audio Output of this DVD player to Dolby Digital unless you are connecting the DIGITAL OUT jack of this
DVD player to an AV decoder that has the Dolby Digital decoding function. High volume sound may damage your hearing as well
as the speakers (Refer to Selecting Digital Audio Output on page 39).
Notes
If the TV has an S-video input, connect
the DVD player with the S-video cable.
When using COMPONENT VIDEO OUTjack, set the VIDEO
OUTPUT switch to COMPONENT or when using S-VIDEO
OUT jack, set the VIDEO OUTPUT switch to S-VIDEO.