Filter
Top Products
You can enjoy surround-sound effect over two speakers.
Press the MODE button during
playback.
Press the ENTER button to set it 1(Natural effect),
2(Emphasised effect) or OFF.
Press the RETURN button to exit.
NOTES
:
• Select Virtual Surround OFF or adjust the volume down
if the sound is distorted.
• Virtual Surround will not be effective if the sound mode
is set to something other than “STEREO”. (for Audio
CDs or Video CDs play only)
• The setting will be saved even if the player is turned off.
3
2
1
WMA
MP3CDVCDDVD-RWDVD-V
Virtual Surround
–
22
–
EN
PLAYING A DISC
Changing the On-Screen Display
Marker Setup Screen
Hints for the On-Screen Display
• C- indicates Chapter repeat
• T- indicates Title or Track repeat
• A- indicates Disc repeat
• AB- indicates A-B repeat
Use markers to memorise your favourite places on a disc.
Press the SEARCH MODE but-
ton repeatedly until the display
screen and Markers appear dur-
ing playback.
Press the
Cursor buttons (
s
or B ) to select 1, 2, 3, 4, 5, 6,
7, 8, 9, or 10 and ensure that “
_
:
_ _
:
_ _
” appears in
the display.
When reaches the desired point, press the ENTER
button.
• The Title or Track and elapsed playing time will appear
in the TV screen.
To return to the Marker later, press the SEARCH
MODE button repeatedly during playback and the
s or B button to choose the desired marker, then
press the ENTER button.
NOTES:
• Opening the disc tray or turning off the power or select
AC at step and press the ENTER button will erase
all Markers.
•To clear a marker, using the s or B button, position
the cursor on to the marker number to be cleared and
press the CLEAR button.
•You can mark up to 10 points.
Press the SEARCH MODE or RETURN button to
exit.
5
2
4
3
2
1
CDVCDDVD-RWDVD-V
You can check information about the current disc by pressing
the DISPLAY button on the remote control.
Press the DISPLAY button
during playback to show the
current chapter.
• The elapsed and remaining
playing time of the current chapter will be displayed.
Press the DISPLAY button to show the current
title.
• The elapsed and remaining playing time of the current
title will be displayed.
Press the DISPLAY button to show the BIT RATE
and the current repeat setting.
• If you are playing a dual layered
disc, the layer number will also
be displayed (L0: Layer 0 is
playing. L1: Layer 1 is playing).
• If you are playing a DVD-RW
with setting the PLAYLIST, the
following will also be displayed.
ORG: Playing the ORIGINAL.
PL: Playing the PLAYLIST.
Press the DISPLAY button to remove the display.
4
3
2
1
DVD-RWDVD-V
Press the DISPLAY button during playback, the
current track will be displayed on the TV screen.
• The elapsed and remaining playing time of the current
track will be displayed.
Press the DISPLAY button to show the total tracks.
• The elapsed and remaining playing time of the disc will
be displayed.
Press the DISPLAY button to remove the display.
3
2
1
VCDCD
IIII
L0T
9/49 0:00:00 -0:00:00
IIII
ORGT
E59M2/M4ED(EN).qx3 04.4.27 2:50 PM Page 22