![](http://pdfasset.owneriq.net/8/8b/88bf6959-9c0f-4aca-85f5-b17fb4a65a31/88bf6959-9c0f-4aca-85f5-b17fb4a65a31-bgc.png)
12 MARMITEK
Returning the Easycontrol 6 to the original factory settings
• Keep the SETUP (9) button pressed until one of the Mode LEDs stays lit.
Release SETUP.
• Press STOP (21) twice and release the button.
• Press Mute (5) and release the button.
• The LED will extinguish after a few seconds.