![](http://pdfasset.owneriq.net/6/f4/6f4fa792-5c42-4783-b1d3-50e90c5d6be9/6f4fa792-5c42-4783-b1d3-50e90c5d6be9-bga.png)
10 MARMITEK
Returning the Easycontrol 4 to the original factory settings
• Keep the SETUP (9) button pressed until one of the Mode LEDs stays lit.
Release SETUP.
• Press STOP (21) twice and release the button.
• Press Mute (5) and release the button.
• The LED will extinguish after a few seconds.