Filter
Top Products
- 16 -
Connect Peripheral Equipment
There isa wide rangeof audioandvideoequipment
that can be connected to your TV.
The following connection diagrams show you where
thedifferent(Optional)equipmentshouldbeconnected
at the rear side of the TV.
HighDefinition
Your LCD Television is capable of displaying High
Definition pictures from devices such as a High
Definition Satellite Receiver or DVD Player. These
devices must be connected via the HDMI socket
(EXT-5)orComponentSocket(EXT-3).Thesesock-
ets can accept either 720p or 1080i signals.
Note: For proper connection of a device to HDMI
input of your TV via using a DVI-to-HDMI
cable,useExtAudioIn(PCAudioIn)forsound
connection.
Via The SCART
LCD TV has 2 SCART sockets. If you want to con-
nect peripherals (e.g. video, decoder, etc.) which
have SCART sockets to the TV, use SCART 1 or
SCART2.
If an external device is connected via the SCART
sockets, the TV will be switched to AV mode auto-
matically.
• Do not connect Digital Set Top Box devices via
SCART 1. UseSCART2.
Via Aerial Input
If you want to connect to your TV, peripherals like
video recorders or decoders, but the device you
want to connect does not have a SCART socket,
you should connect it to the Aerial input of the TV.
If the VCR is connected via Aerial input it is
suggested to use Programme 0.
Decoder
Cable TV offers you a wide choice of programmes.
Most of them are free, others are to be paid for by
the viewer. This means that you will need to sub-
scribe to the broadcasting organisation whose
programmes you wish to receive. This organisation
will supply you a corresponding decoder unit to
allow the programmes to be unscrambled.
For further information ask your dealer. See also
the booklet supplied with your decoder.
Connect a decoder with an aerial socket
to the TV
• Connect the aerial cable.
Connect a decoder without an aerial
socket to the TV
• Connect the decoder to the TV with a SCART
cable to SCART 1.
TV And Video Recorder
• Connect the aerial cables.
Better picture quality can be obtained if you also
connect a SCART cable to SCART sockets.
PlaybackNTSC
To use this option you can;
• Connect an NTSC VCR player to a SCART socket
at the rear side of the TV.
• Connect an NTSC VCRplayer to RCA Jacks at the
right side of the TV.
Then,press
AV
buttontoselectappropriate source.
CopyFacility
Source selection for VCR recording.
• Select Feature menu.
• Select Ext-2 Out by pressing “
” or “
” button.
• Select a source to copy the picture from that
source.
Search For And Store The Test Signal
Of The Video Recorder
• Unplug the aerial cable from the aerial socket of
your video recorder.
• Switch on your TV and put the video recorder on
the test signal. (See the booklet for your video re-
corder.)
• Enter the Install menu and select search.
• Search for the test signal of your video recorder
in the same way as you searched for and stored
the TV signals. Store the test signal under
programme number 0.
• Replace the aerial cable in the aerial socket of
your video recorder once you have stored the test
signal.
Camera And Camcorder
To Connect To AV Input
Connect your camera or camcorder to AV (EXT-4)
input at the right side of the TV.
• Connect your equipment to the TV via VIDEO (yel-
low),AUDIO R (red) and AUDIO L (white) inputs.
You must connect the jacks to the input using the
samecolour.
01-ENG-37737W-42737W-1072 UK-37-42 INCH 17MB15 OEM-(HD READY)(WOVGA-WOPIP)(S)-50101853.p6502.04.2007, 11:1716