Filter
Top Products
Press INPUT button on the remote controller.
Press this button repeatedly until the picture of TV program appears.
Watching AV program
Switching from AV to TV
14
To watch a video program from AV inputs, press INPUT button
repeatedly until you see the appropriate input indicator on the
screen.
This TV set provides 2 groups of AV input terminals and one group of
COMPONENT input terminals for your convenient connection to
VCR, DVD or other video equipments.
AV1
COMPONENT
AV2
Note: S-VIDEO input uses the same circuit as VIDEO1, and the S-
VIDEO terminal overrides the VIDEO1 terminal. When both S-video
and video1 signal are input, the S-video signal is selected and the OSD
is "SVIDEO". To view video1signal, disconnect the S-VIDEO
connection.
8-0
MONO
DISPLAY
button
Select Input
Source
GUIDE
button
Basic Operation (continued)
Displaying the information banner
The information banner displays status information such as
channel number and signal source. Depending on the mode,
different information is displayed. In DTV mode, more information
(such as channel number and channel name, signal resolution,
etc.) can be displayed.
Press DISPLAY
button and the information banner appears.
Using the program guide
You can press GUIDE button on the remote control
to display guide information if available. You can
obtain program broadcasting time and program
name from the guide.
Note:
The GUIDE works only with digital channels.
(Example)
GUIDE
07:00PM-08:00PM WGBH-S
WGBH DTV Broadcast Signal
08:10PM-10:00PM WGBH-S
WGBH DTV Broadcast Signal
1/1
Press3or4 to scroll page if
there are two or more pages.