Memorex MVT2137 TV VCR Combo User Manual


 
5
ENGLISH
If you cause a static discharge when touching the unit,
and the unit fails to function, simply unplug the unit
from the wall outlet, wait one hour and plug it back in.
The unit should return to normal operation.
Avoid extreme heat or cold (41˚F/5˚C-104˚F/40˚C).
Do not place the unit on or near appliances which may
cause electromagnetic interference (e.g. speakers,
etc). Doing so may cause erratic operation of the unit
including picture and/or sound distortion or noise.
Avoid extreme moisture and dust.
The ventilation holes prevent overheating. Do not
block or cover these holes. Especially avoid covering
the holes with soft materials such as cloth or paper.
Do not insert fingers or any other objects into the
cassette loading slot. Do not spray cleaner or wax
directly on the unit or use forced air to remove dust.
Avoid places subject to strong vibration. Use in a
horizontal (flat) position only.
Keep the unit away from flower vases, sinks, etc.
If liquids should be spilled into the unit, serious damage
will result. If you spill any liquids into the unit, unplug the
AC power cord immediately and consult qualified
service personnel before attempting to use it again.
When you finish operating the unit, always unload the
cassette and turn off the power.
When you leave your home for a long time, unplug the
AC power cord.
To protect the unit from a lightning storm, unplug the
AC power cord from the wall outlet and disconnect the
antenna.
DO NOT OPERATE ANY FUNCTIONS ON THIS UNIT
FOR AT LEAST TWO OR THREE HOURS WHEN
MOISTURE IN THE AIR CONDENSES ON IT. LET THE
UNIT STAND WITH POWER ON (SEE BELOW).
WHAT IS MOISTURE CONDENSATION?
When a cold liquid is poured into a glass, for example,
water vapor in the air will condense on the surface of
the glass. This is called moisture condensation.
MOISTURE WILL CONDENSE ON THE UNIT IN
THE FOLLOWING CASES:
When you move the unit from a cold to a warm place.
After heating a cold room or under extremely humid
conditions.
WHEN YOU EXPERIENCE THE ABOVE CONDI-
TIONS,
"DEW" appears on the screen and all the function
buttons except the EJECT button (or the STOP/
EJECT button on the unit) are made non-operational
to protect the video heads. In this case, eject the
video cassette, leave the unit turned on and let it
remain at room temperature until moisture condensa-
tion disappears. Depending on the surrounding
conditions, this may take two or three hours.
SAFETY PRECAUTIONS
MOISTURE CONDENSATION
LOCATION AND HANDLE
For a car equipped with air bags, be sure to follow the
manufacturers instructions whenever performing any
electrical wiring work. Incorrect wiring can cause the air
bag system of a car to malfunction.
Never cut the insulation from the power supply lead in
an attempt to draw power for another device.
Doing so can overload the current capacity of the
lead, creating the danger of fire and electric shock.
For proper installation and wiring, special technical
knowledge is required. If you have any doubts about
where to position or how to install components,
contact the retailer where you purchased the product,
your automobile dealership, or an automotive service
provider. Note that you will be charged separately for
installation work.
Use all of the components that come with this product
only as directed. Improper use of components can
damage interior components or result in improper
anchoring of components, which creates the danger of
accident and personal injury.
Improper installation creates the danger of fire and
accident.
Take care so wires are not pinched between chassis
parts, by screws, or by the seat as it slides on its rails,
etc. Such conditions can cut wires and cause shorts,
creating the danger of accident, electric shock, and fire.
Avoid installation in areas subject to strong vibration
and areas where secure anchoring cannot be
achieved. Components installed in such areas can
work loose, creating the danger of accident and
personal injury.
Never install the TV/VCR on the dashboard or in any
other location where it obstructs forward vision.
Never attach the stand to the roof of your car. Doing
so creates the danger of the TV/VCR falling down.
Never attach the stand to a sharply angled surface or to
a surface that causes the TV/VCR to face downwards.
Such installation can cause the TV/VCR to fall.
Be sure to turn the ignition key of the car to the OFF
position before connecting or disconnecting wires and
cables. Failure to do so creates the danger of electric
shock and personal injury.
INSTALL THE TV/VCR IN YOUR CAR
5A3A901A E P02-11 3/18/02, 10:06 PM5