Filter
Top Products
10
VCR CONNECTIONS
CONNECTION USING COAXIAL CABLE:
Follow the instructions below to connect a VCR to your television using a 75 ohm coaxial cable. (CABLES NOT INCLUDED.)
1. Connect the cable, satellite or incoming antenna to the VHF/UHF IN jack on the rear of the VCR.
2. Connect a 75 ohm coaxial cable from the VCR’s 75 Ohm OUT jack to the ANT jack on the rear of the TV.
3. Press the TV/VIDEO button until a channel appears on the TV screen and press PLAY on the VCR to watch a tape.
VCR
REAR OF TV
INCOMING CATV CABLE
From VCR OUT jack
1. Connect the cable, satellite or incoming
antenna to the VHF/UHF IN jack on the
rear of the VCR.
2. Connect the left and right audio cable from
the VCR’s Audio OUT jacks to the TV’s
audio left and right AUDIO IN jacks.
Connect the VCR’s video OUT jack to the
TV’s VIDEO IN jack.
3. Press the TV/VIDEO button until AV
appears on the TV screen and press PLAY
on the VCR to watch a tape.
CONNECTION USING AUDIO/VIDEO CABLES:
Follow the instructions below to connect a VCR to your television using Audio/Video cables. (CABLES NOT INCLUDED.)
FAQ:
My VCR has only 1 Audio jack, but this TV has two Audio input jacks, how do I connect it?
Simply connect it to the “L (Mono)” Audio input jack, but the sound will be monaural.