Memorex MT1132 CRT Television User Manual


 
PROBLEM SOLUTION
Make sure batteries are inserted in the remote control.
Make sure the remote control is aimed directly at the
remote sensor on the TV.
Press the TV/CAP/TEXT button until the CAP or TEXT
box disappears from the screen.
Adjust the brightness and contrast controls.
Check the antenna for shorted or broken wires.
Reposition the antenna.
Try another channel to make sure there is no station
trouble or local interference (such as electric motors). If
possible, minimize by adjusting the antenna.
Picture Too
Light/Dark
Picture Interference
Remote control
Doesn't Work
Big black box
on screen
Make sure the show is being transmitted in color by
checking to see if another channel is in color.
Adjust the color control.
No Color
Use the VOLUME (Up/Down) buttons to turn up the
volume.
Make sure the sound is not muted by pressing the MUTE
button.
No Sound
Make sure the antenna is properly connected at the back
of the TV.
Make sure the antenna is not broken.
Adjust the brightness and contrast controls.
No Picture
No Power Make sure the unit is plugged in.
Unplug the unit from the electrical outlet for 60 seconds.
Then plug it in and turn it on again.
BEFORE REQUESTING SERVICE
Before requesting service, check the following list of problems and solutions. You may
be able to solve the problem yourself.
PRINTED IN MALAYSIA
Adjust the color and tint controls.
Wrong Color
BEFORE REQUESTING SERVICE
1111-31810M178 MC9910 - 1