Filter
Top Products
10
ADJUSTING PICTURE
Press the MENU button.
Press the SET + or – button until the indicator next to
"PICTURE" begins to flash, then press the ENTER button.
Press the ENTER button repeatedly to select the item you
want to adjust.
You can adjust the settings for color, sharpness, contrast,
brightness and tint.
TO RETURN TO INITIAL SETTING
Press the RESET button while the picture adjusting mode
appears on-screen.
1
2
3
4
Press the SET + or – button to adjust the setting.
SOUND ADJUSTMENTS
NOTE: The on-screen display will disappear 6 seconds after
finishing an adjustment. The settings can only be
adjusted when they are displayed on the TV screen.
Sound controls are factory preset but you can adjust them indi-
vidually as follows:
To display sound adjustments on the screen, press the MENU
button. Press the SET + or – button to select the AUDIO option,
then press the ENTER button.
BALANCE
Press the ENTER button until “BALANCE” appears on the
screen, then press the SET + or – button to obtain an equal
sound level from both speakers.
RESET
Pressing the RESET button while making sound adjust-
ments will return all adjustments to the factory preset levels.
BASS
Press the ENTER button until “BASS” appears on the screen,
then press the SET + or – button to adjust the bass sound.
TREBLE
Press the ENTER button until “TREBLE” appears on the screen,
then press the SET + or – button to adjust the treble sound.
The TV is equipped with a feature known as Multi-channel TV
Sound or MTS. MTS broadcasts greatly enhance TV viewing
by bringing you programs with high fidelity stereo sound.
MTS also provides an extra channel called the Separate
Audio Program or SAP which broadcasters can use to
transmit a second language for bilingual transmission or for
other purposes.
LISTENING TO STEREO SOUND
When the TV is turned on or a channel selection is made,
make certain that the word “STEREO” appears on the
screen. This means that "Stereo" broadcasting is available.
You can enjoy stereo sound from the left and right speakers.
• When the "Mono" broadcasting is received, no indication is
displayed.
• If the broadcast signal is not strong enough or clear stereo
sound is not available, press the AUDIO SELECT button
to change to mono sound. The noise should be eliminated.
Press it again to return to the stereo sound.
LISTENING TO SAP (SEPARATE AUDIO PROGRAM)
When the TV is turned on or a channel selection is made, make
certain that the letters “SAP” appear on the screen. This means
that the "Separate Audio Program" broadcasting is available.
TO SELECT DESIRED SOUND
Press the AUDIO SELECT button to select the desired sound.
STEREO AND SEPARATE AUDIO PROGRAM (SAP)
NOTE: If connecting this TV with a VCR and/or Cable box, to
receive stereo sound you must use audio/video cables for all
connections. You must also verify that your VCR and/or Cable
box are stereo units.
MONO+SAP BROADCASTING
SAP SOUND
MAIN SOUND
(MONO)
MAIN + SAP SOUND
(MONO)
MAIN SOUND
(STEREO)
STEREO+SAP BROADCASTING
MAIN + SAP SOUND
(MONO)
MAIN SOUND
(MONO)
SAP SOUND
BRIGHTNESS
CONTRAST
COLOR
TINT
SHARPNESS
+
increase brightness
increase contrast
brilliant color
greenish color
decrease brightness
decrease contrast
pale color
reddish color
makes picture softer
makes picture clearer
–
CONTRAST COLORBRIGHTNESS TINT SHARPNESS
For additional set-up or operating assistance, please visit our WEBSITE at www.memcorpinc.com or
contact CUSTOMER SERVICE at 1-800-919-3647
Please keep all packaging material for at least 90 days in case you need to return this product to
your place of purchase or Memorex.
FOR PARTS AND ACCESSORIES, CONTACT FOX INT'L AT 1-800-321-6993
3L40901A-E 11/3/2002, 12:0510