Filter
Top Products
10
TO MEMORIZE CHANNELS
This TV is equipped with a channel memory feature which
allows channels to skip up or down to the next channel set into
memory, skipping over unwanted channels.
Before selecting channels, they must be programmed into the
TV's memory. In addition to normal VHF and UHF channels,
this TV can receive up to 113 Cable TV channels. To use this
TV with an antenna, set the TV/CATV menu option to the TV
setting. When shipped from the factory, this menu option is in
the CATV setting.
TV/CATV SELECTION
1 Press the MENU button.
2 Press the SET + or – button until the
indicator next to "CH SET" begins
to flash, then press the ENTER button.
3 Press the SET + or – button until the
indicator next to "TV/CATV" begins
to flash.
4 Press the ENTER button to select
the TV or CATV mode. The arrow
indicates the selected mode.
5 Press the MENU button twice
to return to normal TV viewing.
The chart below is typical of many cable system channel
allocations.
CATV CHART
NOTE: Contact your cable company to determine the type of
cable system used in your area.
AUTOMATIC CHANNEL MEMORY
1 Press the MENU button.
2 Press the SET + or – button until the
indicator next to "CH SET" begins to
flash, then press the ENTER button.
3 Press the SET + or – button until the
indicator next to "AUTO CH MEMORY"
begins to flash, then press the ENTER
button. The TV will begin memorizing
all the channels available in your area.
Channel numbers will remain red until
auto memorizing is complete.
4 Press the MENU button twice to return
to normal TV viewing.
TO ADD/DELETE CHANNELS
1 Press the MENU button.
2 Press the SET + or – button until the
indicator next to "CH SET" begins to
flash, then press the ENTER button.
3 Press the SET + or – button until the
indicator next to "ADD/DELETE"
begins to flash, then press the
ENTER button.
4 Select the desired channels to be
added or deleted using the Direct
Channel Selection buttons (10 keys,0-9),
the CH ▲ or ▼ button or the SET + or – button.
5 Press the ENTER button to select ADD or DELETE. If an
unmemorized channel was selected (step 4), the channel
indicator will be red. Press the ENTER button if you wish
to ADD the unmemorized channel. The channel indicator
will change from red to green when a channel is added
and the channel will be memorized. If a memorized
channel was selected (step 4), the channel indication will
be green.
Press the ENTER button if you wish
to DELETE the channel from memory.
The channel indicator will change from
green to red when a channel is deleted.
Repeat Steps 4 and 5 for each channel
to be added or deleted.
6 Press the MENU button three times after adding or
deleting all of the desired channels, to return to normal
TV viewing.
3M00201A-E 8/2/02, 2:13 PM10