Filter
Top Products
5
ENGLISH
POWER
123
456
7890
TV VCR CABLE
CODE SET
CH ENTER
CH
CH
SET ENTERMENU
TV/AV QUICK VIEWCH.1/2TV/CAP/TEXT
SLEEP AUDIO SELECT
REW F.FWDPLAY
TV/VCR
PAUSE/STILL
REC VCR CH
STOP
RECALLRESET
MUTING
VOL
VOL
1. TV, VCR, CABLE POWER Button* - Used to turn the TV,
VCR or Cable/Satellite box on or off after you
select the operating mode on step 9.
2. Direct Channel Selection Buttons (0-9)* - Allows
direct access to any channel of the TV, VCR or Cable/
Satellite box.
3. CH (CHANNEL) ▲ / ▼ Buttons* - Used to change the
channels of the TV or Cable/Satellite box.
4. MENU Button - Press to display the On-Screen menu
function.
5. RESET Button - Press to reset the On-Screen
picture adjustments to their factory preset positions.
6. CH.1/2 Button - Switches between Channel 1 and Channel
2 in the Closed Caption mode.
7. TV/CAP/TEXT Button - Press this button to switch be-
tween normal TV and the two Closed Caption modes
(captions and 1/2 of full screen text). Closed Captioning will
display text on screen for hearing impaired viewers.
8. SLEEP Button - To set the TV to turn off after a preset
amount of time, press the SLEEP button on the remote
control. The clock will count down 10 minutes each time the
button is pressed in the order of 120, 110, 100, ······ 20, 10,
0. After the sleep time is programmed, the display will
disappear then reappear momentarily every ten minutes to
remind you the sleep timer function is operating. To confirm
the sleep time setting, press the SLEEP button once and the
remaining time will be momentarily displayed. To cancel
sleep time, press the SLEEP button repeatedly until the
display turns to 0.
9. TV, VCR, CABLE Selector Buttons - Press to select the
TV, VCR or Cable/Satellite box to be operated.
10. CODE SET Button - Used to register the 2-digit codes to
operate your VCR or Cable/Satellite box. Press this button
and the VCR button or the CABLE button simultaneously to
start a registration (See instructions page 7).
11. CH ENTER Button* - Press to input the selected channel
of the VCR or Cable/Satellite box, in case your unit requires
CH ENTER button.
12. VOL (VOLUME)
/
Buttons - Press the button to
increase, or the
/
button to decrease the volume level.
13. MUTING Button - To turn off the sound, press this button
once. The TV will be silenced and the symbol "MUTING"
will appear on the screen. The muting feature can be
released by pressing the MUTING button again or one of
the VOL or
/
button.
14. SET + / – Buttons - Press to select the desired
setting during On-Screen operations.
15. ENTER Button - Press to enter or select information for
On-Screen operations.
16. RECALL Button - When you press this button, the channel
number will appear on the upper right corner of the screen.
Press the button again to remove display from the screen.
17. TV/AV Button - Switches between TV and external inputs.
18. QUICK VIEW Button - This button allows you to go back to
the previous channel selected by just pressing the QUICK
VIEW button. Press this button again to return to the
channel you were watching.
19. AUDIO SELECT Button - Switches sound between mono,
stereo, and SAP when receiving broadcasts in stereo or
SAP.
20. VCR Operation Buttons* - Press to operate your VCR.
* You can use these buttons to operate your
VCR or Cable/Satellite box after you have
programmed the remote control for the code
that operates your VCR or Cable/Satellite box
(see page 7).
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
REMOTE CONTROL
3M00201A-E 8/2/02, 2:13 PM5