Memorex MVD2037 DVD Player User Manual


 
9
CONNECTION
CONNECTING THE DVD TO A TV USING THE AUDIO/VIDEO OUTPUT JACKS
Audio Cable (Included)
Video Cable (Included)
From
Video Out
From
Audio
Out
To
Audio In
To
Video In
CONNECTING THE DVD TO A TV USING THE S-VIDEO OUTPUT JACK
Audio Cable (Included)
S-Video Cable (Not Included)
From
S-Video
Out
From
Audio
Out
To
Audio In
To S-Video In
NOTES FOR CONNECTING TO A TV:
If your TV has an S-Video input, connect the DVD player with the S-Video cable for best results.
Set the TV’s TV/VIDEO button or switch to the VIDEO setting.
When connecting the DVD, refer to the owner’s manual of the TV, as well as this manual.
When connecting the DVD to the TV, make sure the power is off and both units are unplugged before making any connections.
If your TV only has one audio input, the use of a “Y” connector may be necessary. Visit your local electronics supply store.
Connect the DVD player to your TV directly. If you connect the DVD player through a VCR, the playback picture will be
distorted because DVD video discs are copy protected.
Set the VIDEO OUT Option (on the GENERAL MENU Page) to S-VIDEO if using S-Video.
After connecting, press the AUDIO MODE button to the desired audio setting. (Please refer to ‘AUDIO MODE’ on page
20.)