Filter
Top Products
28
Playback procedure
1
Press OPEN/CLOSE.
The disc tray will open.
2
Place a disc onto the tray.
Hold the disc, position it with the
printed label side up, align it with
the guides, and place it in its proper
position.
3
Press UP/DOWN or LEFT/RIGHT
to select title.
4
OPEN
Press SELECT.
• Title is selected and play commences.
5
Press STOP to end playback.
• Press PLAY to resume playback (from the scene point).
(The unit records the stopped point, depending on the disc.)
• If you press STOP again or unload the disc, the unit will clear
the stopped point.
6
7
To stop the playback, press STOP.
Then press OPEN/CLOSE to open the disc tray.
Remove the disc and then press POWER.
The disc tray closes automatically and unit turns off.
NOTE:
•
•
•
•
•
If a non-compatible disc is loaded, “INCORRECT
DISC” will appear on the TV screen.
Some discs may take one minute until playback
will start.
When you set a single-faced disc face downward
and press PLAY or CLOSE, "READING" will
appear on the display for 10 seconds and then
"NO DISC" will contined to be displayed.
Some playback operations of DVDs may be in-
tentionally fixed by software producers. Since this
unit plays DVDs according to the disc contents
the software producers designed, some playback
features may not be available. Also refer to the
instructions supplied with the DVDs.
When playing DTS-encoded DVDs, excessive
noise will be heard from the analogue stereo
outputs. To avoid possible damage to the audio
system, the consumer should take proper pre-
cautions when the analogue stereo outputs of
the DVD player are connected to an amplifica-
tion system.
Press PLAY or OPEN/CLOSE.
The disc tray closes automatically.
On the TV-screen, “CLOSE”
changes to “READING” and then
playback commences.
• A menu screen will appear on the
TV screen, if the disc has a menu
feature.
CLOSE
READING
AUTOMATIC POWER ON:
The TV/DVD will turn on automati-
cally when OPEN/CLOSE or PLAY is
pressed.