Filter
Top Products
19
ENGLISH
Auto clock setting
The Auto Clock feature enables automatic clock setting and updating, and also automates Time Zone
and Daylight Saving Time settings by receiving XDS (Extended Data Service) information carried on the
channel signal.
Press VCR MENU. The VCR menu screen will appear.
Press
or to select the SYSTEM SET UP menu, then
press ENTER.
2
Press or to select the
“STANDARD TIME” option, then
press ENTER.
After performing the Auto Clock
setting, in some cases the clock may
display an incorrect time zone. You can
correct the clock by selecting your
Time Zone setting per the instructions
above.
When the clock is not set or you set
the clock manually, Time Zone setting
is not available.
NOTE:
You must set the antenna connection before the AC cord plug is
inserted into the AC outlet.
1
Preparation:
Auto clock setting
After you set the antenna connection and plug the AC cord into an AC
outlet (in that order), you must WAIT 30 MINUTES before turning the
power switch to the on position to prevent interference with the Auto
Clock activation function.
After the clock is set automatically, you may have to set the Time
Zone and Daylight Saving Time.
Press POWER to turn on the DVD/VCR after the Auto Clock operation
is completed.
When shipped from factory, the AUTO CLOCK option is set to ON position.
If you turn the DVD/VCR on during Auto Clock setting, the clock is not set.
With cable box connection, if the Auto Clock Setting is unsuccessful,
please select the PBS channel carrying the XDS information, then
turn the DVD/VCR off. After 30 minutes, turn the DVD/VCR on, and
if
the clock is not set automatically, set the clock manually. (See page 21)
•
•
•
3
Press or to select your Time
Zone, then press the ENTER.
Time Zone setting (STANDARD TIME)
4
Press VCR MENU until the MENU screen is cleared.
•
•
Turn ON the TV.
When a TV is connected with an audio/video cable, select the video
input mode on the TV.
When a TV is connected only with an antenna cable, set to the
video channel 3 or 4. Then select VCR position with TV/VCR.
Press VCR/DVD to select the VCR mode. (The VCR indicator will
light.)
Preparation:
•
•
•
•
In the rare event that you live within broadcast range of two stations
in two different time zones, the DVD/VCR may recognize the
wrong station for the AUTO CLOCK set. To correct the situation:
2A77001AE(16-21) 8/29/02, 11:02 AM19