Filter
Top Products
20
1 Press the MENU button.
Check the TIMER REC SET
option is selected, then press
the ENTER button.
2 Press the TRACKING/SET + or
– button to select one of the
program line, then press the
ENTER button.
3 Press the TRACKING/SET +
or – button to select the date,
then press the ENTER
button.
4 Set the start time, end time,
channel and tape speed as in
step 3.
NOTE:To record from external
source set the channel
to "L". "L" will appear
next to CH 125 (or 69).
5 To enter other programs,
repeat step 2 through 4. Or,
press the MENU button twice
to return to the normal screen.
6 Press the TIMER REC button.
The power will go off, the
TIMER REC indicator will
light and the VCR stands by
for recording.
Timer recording can be programmed on-screen with
the remote control. The built-in timer allows automatic
unattended recording of up to 8 programs within 1
month.
EXAMPLE: Program a timer recording for the 26th day,
channel 125 (CATV), 11:00 - 11:30 PM on timer
program number 1 (Tape speed: SLP).
CHECK BEFORE YOU BEGIN
• Turn on the TV and set to the video channel 3 or 4.
• Press the TV/VCR selector button to select the VCR
mode.
• Load a video cassette with the erase prevention tab
intact. The VCR will automatically turn on.
• Check that the clock and date are correct (see page 15).
When a TV is connected with an audio/video cable,
turn the TV and this VCR on and select the video input
mode on the TV.
To cancel timer recording, press the button again and
the TIMER REC indicator will go out.
〈+/–/ENTER/MENU〉
MENU
CLOCK SET
TIMER REC SET
ON OFF
ON OFF
AUTO REPEAT
CH SET UP
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
-:--
-:--
-:--
-:--
-:--
-:--
---
-:-- -:--
---
-:--
---
-:-- ---
---
-:-- -:-- ---
-:-- -:-- ---
-:-- ---
------ -
------ -
------ -
-
------ -
------ -
------ -
------ -
26(SU)
〈
+
/–/ENTER/CANCEL/MENU
〉
START END
DATE
CH
-:--
〈
+
/
–
/ENTER/CANCEL/MENU
〉
DATE START END CH
––––– –: –– –: –– –– –
––––– –: –– –: –– –– –
––––– –: –– –: –– –– –
––––– –: –– –: –– –– –
––––– –: –– –: –– –– –
––––– –: –– –: –– –– –
––––– –: –– –: –– –– –
––––– –: –– –: –– –– –
CH 125
OTR 0 : 30
NOTES: • Press the REC/OTR
button to increase the
time needed for
recording (See the
chart ).
• To cancel OTR, press
the STOP button or
turn off the power.
CH 125
The One-touch Timer Recording feature provides
a simple and convenient way to make a timed
recording.
EXAMPLE: One-touch Timer Recording for 30 minutes.
CHECK BEFORE YOU BEGIN
• Turn ON the TV and set to the video channel 3 or 4.
• Turn on the VCR POWER button.
When a TV is connected with an audio/video cable, turn
the TV on and select the video input mode on the TV.
1 Load a cassette tape with the
erase prevention tab intact.
The clock display will change
in the counter display.
2 Press the SPEED selector
button to select the desired
tape speed SP or SLP.
The counter and SP or SLP
will appear on the screen for
about 4 seconds.
3 Press the direct channel
selection buttons or the
CHANNEL ▲ or ▼ button to
select the channel to be
recorded.
The channel number will
appear on the screen and
display for about 4 seconds.
4 Press the REC/OTR button to
begin recording. Press the
button again to stop recording
after 30 minutes. Each addi-
tional press of the REC/OTR
button will increase recording
time as shown in the chart
below, up to a maximum of 5
hours. The OTR and recording
time will appear on screen for
about 4 seconds.
00 : 00 : 00 SP
ONE-TOUCH TIMER
RECORDING
(
OTR
)
SETTING THE TIMER
RECORDING
Press
once
twice
3 times
4 times
5 times
6 times
7 times
8 times
9 times
Recording time
NORMAL REC
0:30
1:00
1:30
2:00
3:00
4:00
5:00
NORMAL REC
4E30401B E P20-BACK 17/04/2001, 14:0220