Filter
Top Products
21
ENGLISH
TIMER REC SET
DATE
START
END
CH 007
SPEED
////
ENTER/MENU
SLP
23(THU)
7 : 00PM
9 : 30PM
CH
3 Press the ▲ or ▼ button to
select the program position, then
press the ENTER button.
4 Press the B or A button to select
the date, then press the ▼ button.
5
Set the start time, end time, channel and tape speed as in
step 4, then press ENTER.
TIMER REC SET
DATE 23(THU)
START 8:30AM
END – – : – –
CH 012
SPEED
////
MENU
SP
CH
TIMER REC SET
AUTO REPEAT
///
MENU
ON
CH
EXAMPLE: One-touch Timer Recording for 30 minutes.
Timer recording can be programmed on-screen with
the remote control. The built-in timer allows automatic
unattended recording of up to 8 programs within 1
month.
EXAMPLE: Program a timer recording for 23rd day, channel
007 (CABLE), 7:00 - 9:30 PM (Tape speed : SLP).
• Load a video cassette with the erase prevention tab
intact. The TV/VCR will automatically turn on.
• Set the TV/CABLE selection to the appropriate position
(See page 15).
NOTES: • If programming is performed without a tape in
the TV/VCR, or with a tape without an erase
prevention tab, the Timer Recording is not
possible. If a tape without an erase prevention
tab is in the TV/VCR, the tape will be ejected.
• To record from the external equipment press
the
B or A button repeatedly until “L” (LINE:
from AUDIO/VIDEO IN jack on the front)
appears when setting the channel in step 5.
• The VCR section cannot be used while the
T-Rec indicator is lit. If you want to use the
VCR operation, press the TIMER REC button
to deactivate the timer.
• After a power failure or disconnection of the
power plug, all programmed recording setting
and time display will be lost upon resumption of
power. In this case, reset the clock (see page
13) and reprogram any timer recordings.
• If you want to correct the digits while setting,
press the ▲ or ▼ button until the item you
want to correct, then press the B or A button to
correct the desired setting.
The One-Touch Timer Recording feature provides a
simple and convenient way to make a timed recording.
ONE-TOUCH TIMER
RECORDING
(
OTR
)
5 Press the Direct Channel Selection buttons or CH M/
? button to select the channel to be recorded.
6 Press the REC/OTR button to
begin recording. Press the button
again to stop recording after 30
minutes. Each additional press of
the REC/OTR button will increase
recording time as shown below,
up to a maximum of 6 hours.
“OTR” will appear on the screen.
NOTES: • Press the REC/OTR
button to increase the
time needed for recording
(See the chart right).
• To cancel OTR, press
the STOP button.
• The TV/VCR channel
cannot be changed
during recording.
1 Press the POWER button to turn on the TV/VCR.
2 Load a video cassette with the erase prevention tab in-
tact.
3 Press the SPEED button to
select the desired tape speed
(SP or SLP). SP or SLP will
appear on the screen.
4 Set the TV/CABLE option to the
appropriate setting (See page 15).
OTR 0 : 30
CH 012
INDEX
00
:
00
:
00 SP
TV - VHF/UHF channels
CABLE - CABLE TV channels
Press
once
twice
3 times
4 times
5 times
6 times
7 times
8 times
9 times
10 times
Recording time
NORMAL REC
0:30
1:00
1:30
2:00
3:00
4:00
5:00
6:00
NORMAL REC
TIMER RECORDING
1 Press the MENU button.
Press the B or A button to select
the
option.
2 Press the ▲ or ▼ button to select
the TIMER REC SET option, then
press the A button.
TIMER RECORDING
6
To set the timer for another program, press the ▲ or ▼
button until the number of the second program
highlighted, then press the ENTER button. Repeat
steps 4 to 5 to set the second program.
7 Press the TIMER REC button. The T-Rec indicator
will light. The Timer is programed, when the programed
time is reached, the recording is automatically started.
To cancel timer recording, press the TIMER REC button
again and T-Rec indicator will go out.
5M10421A E P18-25 26/5/04, 10:4521