Filter
Top Products
25
OPERATION–VIDEO PLAYBACK MODE
2
1
1
TO WATCH VIDEOS
Use the Navigation ▲ 1 and/or ▼ 2 buttons
to browse through the videos. Then press
the Enter/Play/Pause
®p button 3 to
begin playback.
2
1
3
Turn the unit on and access the main menu
as described on page 16. Select Video
using the Navigation
▼ button 1, followed
by the Enter/Play/Pause
®p button 2.
NOTES:
• IMPORTANT! Make sure the video resolution is 128 x 128.
• See pages 8 and 10 for information on uploading video files to this unit.
• You can pause playback at anytime by pressing the Enter/Play/Pause
®p button; the video will remain
paused until the button is pressed again.
• This unit will play the selected video, then all the following videos. When they finish, the unit will go back
to the Video menu.
• While in Video playback mode, press the Navigation
▼ button and the display will show the time line for
a few seconds.
• To exit Video playback mode, press the MENU/Lock button.
2
This unit supports the following video formats: AVI support (decoder: xvid, size: 128 x 128 resolution, Frame Per
Second: 30fps max, Bit Rate: 768 kbps max, Frequency Range: 8-48kHz, Audio Format: 128kbps, 48kHz, Stereo
CBR); WMV support (decoder complexity: simple profile, size 128 x 128 resolution, Frame Per Second: 30fps max,
Bit Rate: 384 kbps max , Frequency Range: 8-48kHz, Audio Format: 128kbps, 48kHz, Stereo CBR).