Metz Linea-70 SF Flat Panel Television User Manual


 
25
Call the menu13. Colour standard
In a menu with two asterisks (**), the set-
tings for the menu item "Colour standard"
cannot be changed.
Your TV set normally detects the colour standard
(PAL, SECAM, NTSC, NTSC44, PAL60, PAL M)
automatically. If this automatic function does not
work, you can select the colour standard manually.
The colour standard function is set in the factory
to „Automatic“.
Setting the colour standard
:
• Select the programme position for
which you want to set the colour stan-
dard.
• Press the „MENU“ key to open the TV
menu.
• Press the white key to open the
„station table“.
• Move the cursor to „Colour standard“.
• Press the „OK“ key to confirm your
selection and then, in the setting win-
dow, use the
-
+
key to select the
appropriate colour standard.
• Press the „OK“ key to save the new setting.
• Press the „TV“ key to close the menu.
2) Available only on TV sets which are equipped
with this option.
MENU
OK
OK
009 MDR
008 SW 3
007 N24
006 PRO 7
005 RTL
004 SAT 1
003 Bayern 3
002 ZDF
001 ARD
Colour standard Automatic mode
Picture-Volume
AV devices
Station table
Timer
Configuration
Decoder
Sound correction
Colour standard*
Picture corrections*
Picture quality*
Enter Logo
Frequency/channel
TV Standard*
TV-Menü
Station table
: select
menu item
* The number of subjects and sections
displayed here depends on the opera-
ting scope setting in the menu.
  