Metz SF 72TK67 Flat Panel Television User Manual


 
6
The remote control unit transmits com-
mands to the TV set with the aid of
infrared light. You should always point
the remote control unit directly at the TV
set. The remote control unit may possi-
bly interfere with other infrared devices
(such as infrared headphones) within its
range.
Sunlight falling directly on the TV set
may interfere with the operation of the
remote control unit, because the TV set
cannot detect the infrared signals from
it. The TV set must first be switched on
with the main switch before the remote
control unit can be used.
The most important keys in nor-
mal use
³ ON:
the last station watched before the set
was switched off is selected.
OFF (standby)
Numeric keys (direct station selection)
P+ / P-: next/previous programme
position
Volume control
Also used to change settings in the
menu
ƹ Return to previously selected pro-
gramme position
ƻ Display the station table
3. Remote control unit
Never load rechargeable batteries
into the battery compartment of the
remote control unit!
Only use two 1.5V LR03/AM4 batte-
ries, size AAA.
³
ƹ
ƻ