Filter
Top Products
I. Hardware Installation
The installation of AlchemyTV™ is a two step process starting with the hardware installation into
your PowerMac. AlchemyTV™ is a PCI card that should be installed in a free expansion slot of your
Mac.
Makes sure you are wearing an anti-static wrist wrap before beginning the installation.
PowerMac G4
1. Shut down your Mac and open the side door of your PowerMac. Locate an unused PCI slot.
Using a small Phillips-head screwdriver, remove the retaining screw from the PCI expansion
slots access panel, then remove the access panel itself.
2. Align the connector end of the card with the PCI expansion slot and insert the card. Secure the
card with the screw that you removed in the previous step.
AlchemyTV DVR™ User Guide
Page 6