Filter
Top Products
STB: opens set-top box menu.
A/V / s . . . . . . . . . . . - mutes the sound of the TV.
- pressed together with SHIFT 6: selects external
Audio/Video inputs, connected to the SCART
connector(s) of your equipment (A/V function).
OK / . . . . . . . . . . . TV:
- selects wide screen TV (16:9).
- pressed together with SHIFT 6: confirms your
selection.
VCR: opens showview.
STB: pressed together with SHIFT 6: confirms
your selection.
BACK / . . . . . . . . - jumps back one level in the menu or turns off
the menu.
- switches text TV off.
4 - VOL + . . . . . . . . . . . - adjusts the TV volume.
- pressed together with SHIFT 6: cursor left, right
in a menu.
5 Digit keys . . . . . . . . . direct choice of channels and tracks.
6 SHIFT . . . . . . . . . . . . for extra functions.When pressed at the same
time as a second key, the second key will get
another function. For example:
SHIFT + 2 . . . . . . . . opens electronic TV program guide.
SHIFT + . . . . . . . enters TV menu.
Try out other combinations with the SHIFT-key on your device in order to
find out which functions are available.
Only functions featured on the original remote control are available.
7 5. . . . . . . . . . . . . . . . . TV: red fasttext key.
VCR/DVD: searches fast backwards.
2 / GUIDE. . . . . . . . VCR/DVD: starts playback.
STB: opens electronic TV program guide.
6. . . . . . . . . . . . . . . . . TV: blue fasttext key.
VCR/DVD: searches fast forward.
9 . . . . . . . . . . . . . . . . . VCR/DVD: stops playback / recording.
TV: green fasttext key.
0 / FAV(orites) . . . VCR/DVD:
- starts recording.
- selects favorite menu options.
; . . . . . . . . . . . . . . . . . . TV: yellow fasttext key.
VCR/DVD: pause playback / recording.
8 / . . . . . . . . . . . . . . . . selects between one- and two-figure channel
numbers.
9 - PROG + . . . . . . . . . - selects a previous or following channel /
program.
- pressed together with SHIFT 6: cursor up, down
in a menu.
0 TV/STB/ . . . . . . . . . . selects TV, STB,VCR or DVD mode.
VCR/DVD
• If the device does not respond at all, or not to all of the key
commands, follow the instructions under ‘Setting the remote
control’. It is possible that you must enter another code for the
device.
7
Instructions for use
English