Filter
Top Products
4. TV Menus 47
For assistance call 1(800) 332-2119
Contrast Low contrast shows a variety of shades in darker images•
In most home lighting situations, medium contrast looks •
best.
High contrast shows darker images more uniformly black •
and makes colors appear more vibrant. High contrast is
good for brightly lit environments.
Adjusts the white-to-black level
Settings are stored indepen-
dently for each Picture Mode.
Brightness Adjusts overall picture brightness. Settings are stored independently for each Picture Mode.
Color Adjusts overall color intensity from monochromatic to fully saturated.
Tint Adjusts the red-to-green ratio.
Sharpness Adjusts picture detail and clarity.
Color Temp High
Gives white images a cool cast. May provide the most
realistic picture under bright lighting.
Adjusts the white balance.
Settings are stored indepen-
dently for each Picture Mode.
Low Gives white images a warm cast. Natural/Color
Temp at the low setting displays video at approxi-
mately the 6500K industry standard for NTSC
pictures.
Video
Noise
High,
Medium,
Low, Off
High.• For poor-quality signals.
Medium. •
For moderate noise reduction.
Low. • For good-quality signals.
Off. • Leaves the picture unaltered.
Reduces minor noise (graini-
ness) in the picture.
EdgeEnhance
(164, 265 series)
On, Off EdgeEnhance™ adds special edge enhancements to make the image appear
sharper.
DeepField
Imager
(164, 265 series)
On, Off DeepField™ Imager dynamically enhances black levels in portions of the screen to
provide strong contrast with detail over mixed screen content.
Demo For comparison, displays a split picture to show On (right side) and Off (left side).
Backlight Adjusts peak brightness of the backlight. Applies uniformly to all inputs. Press
ENTER
to turn the
backlight on or off.
Picture Picture+ (Picture Plus)
Screensaver
On, Off Select On to display a screensaver pattern while playing an audio-only input. To
use this feature, the input must either
Be named as an audio source (e.g., • CD, MP3 Player, Bluetooth)
or
Be the antenna input tuned to an audio-only signal.•
Film Mode Auto, Off 480i and 1080i signals only.
In
Auto
, the TV automatically detects and applies
film-decoding correction to movies filmed at 24 frames per second. Try the
Off
setting if images show many jagged edges. Setting saved by input.
Picture, continued
Downloaded From TV-Manual.com Manuals