Filter
Top Products
TV+VCR+antenna or cable without a cable box
(cont.)
_>Important:
[:>Important:
[>Important:
procedure
(See illustration on the :Following page.)
O Connect the incoming cable or anterma to the ANTENNA IN
terminal on the VCR.
O Connect one end of a coaxial cable to t_ae ANTENNA OUT
terminal on the VCR.
O Connect the other end of the cable to the antenna terminal on
the TV.
Connect an RCA pin-type video cable to the VIDEC OUT termi-
nal on the back of the VCR. Connect Lhe other end. of this cable
to the VIDEO INPUT terminal on the back of the television.
If you are connecting a Super VHS (S-VHS) VCR, use a Super Video
cable instead of an RCA pin-type video cable. Connect a Super
Video cable to the S-VIDEO OUT terminal on the VCR. Connect
the other end of this cable to the S-VIDEO INPUT terminal on the
back of the television.
Connect a set of RCA pin-type audic, cables to the AUDIO OUT
terminals on the back of the VCR. U_,_ethe red cable to connect
the right (R) channel and the white cable for conne,_ting the left
(L) channel.
O Connect the other ends of this cable tc the AUDIO INPUT
terminals on the back of the television.
If your VCR is monaural (non-stereo), you will only co_nect a single
RCA pin-type audio cable. Connect the (.,able to the VCR, then
connect the other end to the L (LEFT) audio input on the back of
the television.
If your VCR has the video channel switcl:.,, set to "OFF/AV" mode.
See your VCR's owner's gu,ide for detaii[s.
O Set the VCR to the playback mode.
O To view the VCR, select the external i:aput source by using the
INPUT button on the control panel or remote control.
Basic Connections 29