Mitsubishi Electronics FX-10P.E Universal Remote User Manual


 
x
3.4 Others
Device conversion
Device number conversion is not possible between the following devices because the number
of program steps required is different.
- M0 to M1535
M1536 to M3071 (FX
2N
and FX
2NC
only)
- 16-bit counter
32-bit counter (all FX models)
Writing the program to the FX-EEPROM-16
When an instruction is inserted to a 16K-step program saved in the FX-EEPROM-16 in
online mode, it may take 5 to 50 seconds depending on the total program size and the
instruction insertion position.