Filter
Top Products
16 Display Module (FX3S-5DM)
157
FX3S Series Programmable Controllers
User's Manual - Hardware Edition
11
Built-in Analog
12
Output Wiring
13
Wiring for
Various Uses
14
Test Run,
Maintenance,
Troubleshooting
15
Other Extension
Units and
Options
16
Display Module
(FX
3S
-5DM)
17
Memory
Cassette
A
Special Devices
(M8000-, D8000-)
B
Instruction List
C
Discontinued
models
16.5 Monitor/Test
16.5 Monitor/Test
16.5.1 Relevant devices
Monitoring and testing can be performed from the "Monitor/Test" menu for the devices listed below.
: Possible : Not possible -: Item not supported by this device
*1. The forced ON/OFF processing for devices (Y, M and S) is executed once by the END instruction
executed after the button is pressed.
However, if there are devices (Y, M and S) driven by the OUT instruction in the program, the
instruction execution result is reflected.
16.5.2 Selecting a device
A device to be monitored and tested can be selected.
1. Description of display
*1. Displayed when a data register (D) is selected.
2. Device selection operation
1) Select device using the [+] and [-] buttons.
When the [+] button is pressed, selected device is changed in the
following order:
Data register (D) Data register (DD) Input (X) Output (Y)
Auxiliary relay (M) State (S) Timer (T) Counter (C)
2) Select the desired device and press the [OK] button.
The monitor/test screen appears.
Press the [ESC] button before pressing the [OK] button to return to
the time display screen.
Device
Monitored Items Test Items
Contact Reset
Current
Value
Setting
Value
Forced
ON/OFF
Current Value
Change
Setting
Change
Input (X) - - - - - -
Output (Y) - - -
*1
--
Auxiliary relay (M) - - -
*1
--
State (S) - - -
*1
--
Timer (T)
Counter (C)
Data register (D, DD) - - - - -
File register (D, DD) - - - - -
Index register (V, Z) - - - - -
Display Content
[1] Displayed device
[2]
32-bit display
*1
[1] [2]