Filter
Top Products
1. Television Overview 9
TV Main Panel
HDMI
VIDEO: 480i,
480p /720p
1080i /1080p
AUDIO:
PCM STEREO
PC: VGA,
W-VGA, SVGA,
W-SVGA, XGA,
W-XGA, SXGA /
720p/1080p
4
3
2
1
IR-
Output / External
Controller Input
S-VIDEO
VIDEO
AUDIO
L
R
AUDIO
R
DVI/PC
L
INPUT3
INPUT2 INPUT1
L
R
AVR AUDIO
OUTPUT
AUDIO
L
R
Pb
Y
Y / VIDEO
Pr
ANT2/AUX
ANT1/MAIN
DIGITAL
AUDIO
OUTPUT
NetCommand
) i 0 8 0 1 / p 0 2 7 / p 0 8 4 / i 0 8 4 (
2
11
13
3
8
4
12
1
5
5
6
9
7
RS-232C jack
offered on 246
Series TVs.
Subwoofer output
offered on 246
Series TVs.
10
1. ANT 1/ANT 2 (Antenna)
If you are connecting an antenna or direct cable service
without a cable box, connect the main antenna or cable
source to
ANT 1
. Use
ANT 2
for a second source.
ANT 1
and
ANT 2
can each receive digital and analog
over-the-air channels from a VHF/UHF antenna or non-
scrambled digital/analog cable source.
ANT 1/MAIN and CableCARD™
Use
ANT 1/MAIN
to receive premium subscription
cable TV service authorized by the CableCARD™ access card.
The CableCARD access card is provided by your local cable
company.
2. Component Video (INPUT 1, INPUT 2)
Y Pb Pr Component Video (480i/480p/720p/1080i)
Use these jacks to connect devices with component video
outputs, such as DVD players, external HDTV receivers, or com-
patible video game systems. Use the adjacent
AUDIO R
and
L
jacks for
INPUT 1
or
INPUT 2
if you wish to send audio to the TV.
See Appendix A specifications for signal compatibility.
3. AUDIO L and R (INPUT 1, INPUT 2)
Analog stereo inputs shared by more than one video input.
INPUT 1
• audio jacks are for use with
INPUT 1
component
video (Y Pb Pr) or composite video (single yellow cable).
INPUT 2
• audio jacks are for use with
INPUT 2
component
video exclusively.
4. S-VIDEO (INPUT 3)
Connect an S-Video device to this input. Use the
AUDIO R
and
L
jacks for
INPUT 3
(item 6) if you wish to send audio to the TV.
5. Composite Video (INPUT 1, INPUT 3)
Use the
VIDEO
jacks to connect a VCR, Super VHS (S-VHS)
VCR, DVD player, standard satellite receiver, or other A/V device
to the TV. Use the adjacent
AUDIO R
and
L
inputs for
INPUT 1
or
INPUT 3
if you wish to send audio to the TV. Note that the
INPUT
3
composite video jack is automatically disabled when you
connect to
S-VIDEO
.
6. AUDIO L and R (INPUT 3)
Analog stereo inputs shared by
INPUT 3
composite
video and
S-VIDEO
.
7. DVI/PC INPUT AUDIO
Use the
DVI/PC INPUT AUDIO
jack when connecting
a DVI device to one of the TV’s HDMI inputs using a
DVI-to-HDMI cable. These jacks allow you to send
left and right analog audio from your computer or
other DVI device to the TV.