Filter
Top Products
33
E
Specifi cations
n
Product Specifi cations
Model LDT651P
LCD element 65" wide (163.9 cm diagonal) ASV low-reflection black TFT LCD
Max. resolution (pixels) 1080 x 1920
Max. colours 16.77 M colours (8 bits/colour)
Pixel pitch 0.744 mm (H) x 0.744 mm (V)
Viewing angle 176° right/left/up/down (contrast ratio ≥ 10)
Screen active area (mm) 804 x 1428
Computer input signal Digital (DVI 1.0 standard-compliant), Analogue RGB (0.7 Vp-p) [75 Ω]
Sync signal Horizontal/vertical separate (TTL: positive/negative), Sync-on-green,
Composite sync (TTL: positive/negative)
Video colour system PAL, PAL-60, SECAM, NTSC (3.58 MHz), NTSC (4.43 MHz)
Plug and play VESA DDC2B
Power management VESA DPMS, DVI DMPM
Input terminals PC/AV Digital DVI-D 24 pin (HDCP compatible) x 1
PC Analogue Mini D-sub 15 pin, 3 rows x 1, BNC
*1*2
x 1
Audio 3.5 mm mini stereo jack x 1
AV Composite video BNC x 1
Component BNC (Y, Cb/Pb, Cr/Pr)
*1
x 1
Audio RCA pin (L/R) x 1
Serial (RS-232C) D-sub 9 pin x 1
Output terminals PC/AV Digital DVI-D 24 pin x 1
*3
Audio RCA pin (L/R) x 1
Serial (RS-232C) D-sub 9 pin x 1
Speaker 7 W + 7 W [6 Ω]
Power requirement AC 100 V - 240 V, 50 / 60 Hz
Operating temperature 0°C to 40°C
Operating humidity 20% to 80% (no condensation)
Power consumption 560 W (Input signal waiting mode: 10 W, Standby mode: 4.0 W)
Dimensions (mm) Approx. 923 x 150 x 1,572 (excluding protrusions)
Weight (kg) Approx. 66 (excluding the temporary stand)
*1 Cannot be used simultaneously.
*2 Does not support plug and play.
*3 Connection is allowed with an HDCP-compatible device only. Does not support Repeater control function.
As a part of our policy of continuous improvement, MITSUBISHI reserves the right to make design and specifi cation changes
for product improvement without prior notice. The performance specifi cation fi gures indicated are nominal values of production
units. There may be some deviations from these values in individual units.