Mitsubishi Electronics LT-46151 Flat Panel Television User Manual


 
52
5
NetCommand IR Control
NetCommand IR home-theater control is avail-•
able on 153 series TVs.
IR emitter cables are available for purchase •
from Mitsubishi.
Visitwww.mitsuparts.comorcall
800-553-7278and
requestoneofthefollowing:
242D483020- (two-endedcable)
299P254020- (four-endedcable).
NetCommandsetupisoptional.•
YoucanperformNetCommandsetupwhentheTV•
firstrecognizesadeviceduringAutoInputSensing
oratanyconvenienttimeafterward.
Important Note on NetCommand
Be sure to connect the IR emitter cable to the
TV and properly place the emitters so that
NetCommand can control your devices.
NetCommandoperatesbysendingremotecontrol•
signalsfromtheTVtoyourotherdevicesviathe
IR(infrared)emitters,tellingthedevicestoplay,
record,changeinputs,adjustvolume,changechan-
nels,orperformotherfunctions.Allthisisaccom-
plishedwiththeTV’sremotecontrolleftin
TV
mode.
YoumaywishtouseNetCommandIRcontrolto•
supplementcontrolofCEC-enableddevices.
About NetCommand IR Control