Filter
Top Products
11
1. Headphone
The Headphone Output sends the TV’s connected audio
signals to a pair of headphones. The audio output from the
TV’s speakers will be unavailable.
2. Audio Out
The Audio Output sends the TV’s connected audio signals to
an A/V receiver or other equipment.
3. Inputs 1-2
These inputs can be used for the connection of a VCR, Super
VHS (S-VHS) VCR, laser disc player, or other A/V device to
the TV. With each input, you may connect to the S-VIDEO
or VIDEO terminal but not to both.
4. Antenna (ANT)
Input connection for an over-the-air (OTA) or terrestrial
antenna, a Cable TV wire, or cable box.
5. Component Inputs 1-2
These inputs can be used for the connection of A/V equipment
with component video outputs, such as a DVD player or
compatible Video Game System. Please see Appendix B, page
58, for signal compatibility.
Side Panel Input/Output
6. PC Input (60 Hz Only)
This input can be used for analog RGB signals from a
personal computer. Supported resolutions include VGA,
SVGA, XGA, and WXGA only.
7. PC Audio Input
This is used to send the sound from your computer to the
TV’s speakers.
8. MonitorLink™/DVI (with HDCP)
This is a Mitsubishi-exclusive proprietary digital interface for
the display of high quality digital video signals from Mitsubishi
products such as the HD-5000 HDTV Receiver/Controller.
All video signals, both analog and digital are sent digitally to
your Mitsubushi TV. Can also be used as a DVI input for
other compatible sources.
Note: The DVI-HDTV input terminal is compliant with the
EIA-861 standard and is not intended for use with personal
computers.
9. MonitorLink™ control/RS-232C
A digital control interface that works in parallel with
MonitorLink. While MonitorLink provides the digital video
signal, MonitorLink Control provides enhanced functioning
such as automatic power ON/OFF and input selection. Can
also be used with other compatible RS-232C external devices.
Please visit www.mitsubishi-tv.com for more information or
RS-232C command structure.