Mitsubishi Electronics WS-55805 Projection Television User Manual


 
20
IMPORTANT
IMPORTANT
When you replace the batteries in your remote control,
the remote may return to its initial setting. You may
need to set up your remote again.
Operating Your Remote Control
size AAA
batteries
UM-4 AAA
RO3 1.5V
1. Remove the back cover of the remote control by pushing the
tab in the direction of the arrow and sliding off the cover.
2. Load the batteries, making sure the polarities(+) and (-) are correct.
Installing the batteries
For best results
Be within 20 feet of the equipment when using the remote
control.
Don’t press two or more buttons at the same time, unless you
are specifically instructed to do so in this owner’s guide.
Don’t allow the remote control to get wet or become heated.
Avoid dropping the remote control on a hard surface.
When cleaning the remote control, don’t use any harsh chemi-
cals. Use only a soft, slightly moistened cloth.
Don’t mix new batteries with old ones.
Don’t heat, take apart, or throw batteries into a fire.
Use AAA alkaline batteries.
TV
AUDIO
CABLE/DBS/DTV
DVD
VCR
Using the remote control with your TV
You can use your remote to control the TV, CABLE/DBS/
DTV, VCR, DVD or AUDIO. The remote has been preset
to operate the TV and other Mitsubishi products. It can be
set to control other brands of audio/video equipment.
To operate the TV, the select switch at the top of the
remote should be set to TV.