Mitsubishi Electronics ws-55413 Projection Television User Manual


 
42
43
SETUP Menu: Energy Mode (WS-, WS-,
WS-)
Energy Mode
(Figure 28)
This feature is only for models WS-, WS-
and WS-. Change the setting to Low (less than
 watt) when you want the TV to operate in an energy
saving mode when it is turned off.
If the Energy Mode is set to Low, it will not be
possible to record while the TV’s power is off. There
will be no signal from LOOP OUT (on the TV back
panel) to the VCR and/or cable box.
NOTE: The Standard setting has a faster turn on
time, but uses more power than the Low setting.
Standard is recommended.
ENTER for menu or to start
MENU to return

 
 


  

 





Figure 28. Energy Mode for WS-48413, WS-55413,
WS-65413