Filter
Top Products
15
15
Part II: Installation
How Connections Affect the Home Theater IR System
Special Setups: A/V Equipment
VCR: Do not connect the cables to the TV
as directed on page 17. Connect the cables
to the inputs labeled:
•VCR 1, on the digital A/V receiver, models
M-VR800 or M-VR1000.
•VCR, on digital A/V receiver, models M-VR700 or
M-VR900.
DVD: Connect the cables as directed on
page 19 (using the COMPONENT-1 input),
with one exception. Connect the digital
audio output connection on the DVD player
to the digital input on the back of the digital
A/V receiver.
DTV: Connect the cables as directed on
pages 20-21, with one exception. Connect
the digital audio output connection on the
DTV receiver to a digital input on the back of
the digital A/V receiver.
A/V Receiver: Connect as directed on
page 18, with two additions. Use a S-Video
cable in step 1 if you have a S-Video VCR.
The TV outputs should be connected to the
A/V receivers input marked TV.
•Auto Standby: ON (See your A/V receiver’s
Owner’s Guide for this procedure). For all TV
use, the sound will come from the A/V receiver.
•Digital Input Assignment for DVD: Assign the
digital input you used for your DVD player to the
A/V receiver’s DVD input selector. For example,
if you connected your DVD player’s digital output
to the DIGITAL INPUT 1, you need to assign DIGI-
TAL INPUT 1 to the A/V receiver’s DVD input, so
it will automatically be used. This procedure is
explained in your A/V receiver’s Owner’s Guide.
•Digital Assignment for DTV: For Mitsubishi A/V
receiver, models M-VR800 or M-VR1000, assign
the DTV digital input to VCR 2. VCR 2 will
now be used to hear the DTV sound. If you
have a Mitsubishi A/V receiver model M-VR700
or M-VR900, assign the DTV digital input to
CABLE/DBS. CABLE/DBS will now be used to
hear DTV sound.
Infrared Emitter: Connect as shown on
page 22.
Special Setups: TV
Menu selection for A/V connections, page 32.
•AV Network: OFF
•TV Speakers: OFF
•A/V receiver: Mits A, if you have Mitsubishi A/V
receiver model M-VR800 or M-VR1000.
•A/V receiver: Mits B, if you have Mitsubishi A/V
receiver model M-VR700 or M-VR900.
•Audio Output: Fixed
Remote Control, pages 26-27.
•Set the slide switch to the TV position and
follow the programming instructions using the
A/V receiver code 010. Always point the remote
at the A/V receiver when you wish to adjust the
volume or mute the sound.
(For Home Theater IR System)