Mitsubishi Electronics WS-65809 Projection Television User Manual


 
33
33
To prevent damage from a sudden
increase in volume, make sure the TV
volume is low before choosing ON.
Part III: Setup
SETUP Menu: TV Speakers and A/V Receiver
TV Speakers
(Figure 1)
This selection will turn on or off the
TV’s internal speakers. You may select
Off when sending the sound through a sepa-
rate stereo system or surround sound A/V
receiver.
A/V Receiver
(Figure 2)
Whether or not you have connected the mon-
itor video output of an A/V receiver to the
TV’s INPUT-1 video input, you will need to
set the A/V Receiver correctly to one of the
following:
None: When you have not connected an
A/V receiver monitor video output to the
TV’s INPUT-1 video input.
Mits-A: When you have connected a Mit-
subishi digital A/V receiver (digital surround
sound) model M-VR800 or M-VR1000.
This also activates the Home Theater IR
System. See Remote Control Functions:
Home Theater IR System, page 57, for oper-
ating information.
Mits-B: When you have connected a Mit-
subishi digital A/V receiver (digital surround
sound) model M-VR700, M-VR900, or other
model introduced in 1999 or later. This
also activates the Home Theater IR System.
See Remote Control Functions: Home The-
ater IR System, page 57, for operating infor-
mation.
Other: When you have connected any other
Mitsubishi A/V receiver or another brand of
A/V receiver. This also blocks signal output
from the TV Monitor output when the TV is
set to INPUT-1.
TV Speakers and A/V Receiver
SETUP MENU
AV CONNECTION menu
(Home Theater)
AV Network : Off
TV Speakers :On
(Internal)
AV Receiver :Mits A
Audio Output :Variable
TV Volume Control
ADJUST to select item then
move to and change option
MENU to return
MAIN MENU
Figure 2. A/V Receiver
SETUP MENU
AV CONNECTION menu
(Home Theater)
AV Network : Off
TV Speakers :On
(Internal)
AV Receiver :Mits A
Audio Output :Variable
TV Volume Control
ADJUST to select item then
move to and change option
MENU to return
MAIN MENU
Figure 1. TV Speakers