Filter
Top Products
42
43
CHANNEL EDIT Menu: Memory, Name Selection
Name
(Figure 26)
Name channels shown on Ant-A or Ant-B (up to four
characters). After you enter a name, it will appear on
the TV screen next to the channel number.
1. Select Ant-A or Ant-B.
2. Select the memorized channel you want to
name.
3. Press ADJUST until you see the
underline highlighted in the Name field.
4. Use ADJUST or to select letters A-Z,
numbers 0-9, and/or symbols (!.&’/:*- and blank)
for each character of the name you would like for
the selected channel. Press ENTER after choosing
each letter and after the name is complete. If you
want to change your selection while on the option
field, use CANCEL to delete the current character.
You will move one position back. If you press
CANCEL while at the first character, the entire
name will be deleted.
Memory
(Figure 25)
Add weaker channels viewed with Ant-A or Ant-B
and delete unwanted channels, after all available
channels have been memorized with Memorize
Channels (page ). Use the CH (channel) button on
the remote control to view memorized channels.
ENTER for menu or to start
MENU to return
ENTER for menu or to start
MENU to return
Figure 25. Memory
Figure 26. Name