Filter
Top Products
EN – 15
ENGLISH
Basic operation
Several settings can be adjusted using Menu.
EXAMPLE: Auto power off time setting
1. Press the MENU button.
2. Press the $ or % button to select the OPTION menu.
3. Press the ENTER button (or } button).
4. Press the { or } button to select AUTO POWER
OFF.
5. Press the $ or % button to adjust auto power off
time.
6. Exit the menu system by pressing the MENU but-
ton several times.
• If the menu operation is not working, press the
RESET button on the terminal board using the suit-
able implement
• If the COMPUTER or VIDEO button is pressed, the
MENU selection bar or MENU will disappear.
• The settings with 2 mark, you should press the
ENTER button after selecting.
Menu operation
Opt
PICTURE
Opt
INSTALLATION
Opt
IMAGE REVERSE
INSTALLATION
KEYSTONE 0˚
AUTO POWER ON ON
AUTO POWER OFF 0 min
TEST SIGNAL ON OFF
TEST
R
AUTO POWER ON ON
AUTO POWER OFF 0 min
TEST SIGNAL ON OFF
TEST
AUTO POWER ON ON
AUTO POWER OFF 30 min
TEST SIGNAL ON OFF
TEST
PICTURE CONTRAST ± 30
BRIGHTNESS
COLOR MATRIX
± 30
1 (Standard)
2 (High)
3 (Low)
4 (User)
COLOR TEMP.
SHARPNESS ± 10
TINT ± 10
COLOR ± 10
CONTRAST R ± 30
CONTRAST B ± 30
BRIGHTNESS R ± 30
BRIGHTNESS B
(± 2 : When the source is selected to COMPUTER)
(Displays only when the source is selected to VIDEO)
(Displays only when the source is selected to VIDEO)
(– : When the source is selected to COMPUTER)
± 30
AUDIO BASS 0 - 3
TREBLE 0 - 3
PinP AUDIO (Main) , (Sub)
INSTALLATION IMAGE REVERSE (Off) , (Mirror) , (Invert) , (Mirror invert)
KEYSTONE ± 15˚
AUTO POWER ON ON , OFF
TEST SIGNAL ON , OFF
AUTO POWER OFF
ON , OFF
ON , OFF
OPTION MENU POSITION (Upper left), (Lower right)
SPLASH SCREEN
0 (Off) , 5 , 10 , 15 , 20 , 25 , 30 , 35 , 40 , 45 , 50 , 55 , 60 min.
CINEMA MODE AUTO , OFF
MODE DISPLAY
VIDEO SIGNAL AUTO , NTSC , PAL , SECAM , 4.43NTSC , PAL-M , PAL-N , PAL-60
LANGUAGE
SIGNAL HORIZ.POSITION 0 - 999
VERT.POSITION 0 - 999
FINE SYNC. 0 - 32
TRACKING 0 - 9999
COMPUTER INPUT
USER
RGB , YC
BCR , YPBPR
HOLD BEGIN 1 - 99
HOLD END 1 - 99
CLAMP POSITION 0 - 63
CLAMP WIDTH 0 - 63
ANAMORPHIC ON , OFF
*
*
*
*
*
*
*
* : Setting range is different
according to the type of
the signal.
, English , Español , Deutsch , Français , Italiano ,
R
R
R
R
1
RED ± 10
YELLOW ± 10
BLUE ± 10
GREEN ± 10
CYAN ± 10
MAGENTA ± 10
2
3
USER
USER
OFF