MSB Technology Rev 1 (10 2012) TV Converter Box User Manual


  Open as PDF
of 12
 
11
Upgrades and Modifications
Removal of the cover - The cover cannot be removed. The circuits are potted in the chassis. There are no serviceable parts inside.
Installing or replacing the Input Modules - The modules are designed to be easily installed or replaced. Turn the DAC over and place on a soft
surface like a towel. Please follow these instructions.
PLEASEnotethattheorderthemodulesareinstalledisthepriorityorderyouwillestablishforautomaticinputselection.Thehighestpriorityinput
is located closest to the output connectors.
To remove a module, rst remove the Phillips head screw in the jackpanel
of the module.
Next remove the two screws on the bottom adjacent to the module.
Next remove the knurled screw
from the base of the DAC. This
is your removal tool. Screw it in
hand tight into the back of the
Input Module.
Then pull FIRMLY on the
removal tool. Wiggle gently if
needed. The module will slide
out.
 previous