Filter
Top Products
5
Rear Panel Analog Details
Analog Single-Ended RCA Output –ThisistheprimarysingleendedRCAanalogoutput.Foroptimumperformance,usethisoutputas
the DAC is fundamentally single-ended.
Analog Balanced XLR Output – This is the balanced XLR analog output. This is an alternate output format.
Analog Single-Ended RCA Input – This is the single-ended analog input. This input is passed to the output with no change unless a volume
optionisinstalled.Whenthevolumecontrolisinstalled,thisinputisalso.Withadvancedcontroloptions,thisinputcanbeeithervolume
controlled or not, depending on the menu settings. This input is ideal for adding a vinyl input to your system. Minimum input impedance
is 2 kohms. At 0 dB volume setting, the analog inputs are a direct pass-through. This input should be terminated when not in use.
Rear Panel Power Input
Power Input – This product must be plugged into a Platinum power base with both analog and digital supplies. It will work with both
the Analog DAC desktop supply, Analog DAC power base or any of the DAC IV power bases.
Rear Panel Control Module
Control Interface – This optional interface allows the DAC to be controlled using a web based system This module would need to
connect to a computer network.
RS-232 – The RS-232 optional
interface is used for controlling the
DAC with a system controller.
Rear Panel Digital Inputs
- (Three Module Max)
The Analog DAC can accommodate
up to three input modules at
one time, but they can be easily
swapped in and out as your
system changes. The order of the
modules determines the priority of
input selection in the auto select
mode. The highest priority input
will always interrupt the lower
priority. So if you have a source
that is always on, it should be
set as the lowest priority so any
other source can interrupt it. The
highest priority input is closest to
the analog outputs.
Each module is described below.