Filter
Top Products
GB
37
SELECTING DIGITAL AUDIO OUT
Initial Settings
Each DVD disc has a variety of audio output options. Set the player’s
Digital Audio Output according to the type of audio system you use.
1 At the SETUP screen, press to select Digital Audio Output
and press
2 Press to select the desired output and press ENTER.
DOLBY DIGITAL/PCM
Select “DOLBY DIGITAL/PCM”if an active digital output is supplied to the
Dolby Digital decoder, (or an amplifier or other equipment with a Dolby
Digital decoder).
STREAM/PCM
Select “Stream/PCM” if an active digital output is supplied to an
amplifier or other equipment with DTS decoder, Dolby Digital decoder
and MPEG decoder.
PCM
Select “PCM” if an active digital output is supplied to an amplifier or
other equipment with linear PCM only (or MD recorder or DAT deck).
NOTES
• When you are not using the player’s digital audio output, don’t select
any of the options.
• If an active digital audio output signal is supplied to an receiver or
other equipment without a corresponding digital decoding capability,
a very loud noise may be produced which could permanently
damage the speakers.
• The DTS DVD disc sound is played back only when the DVD player is
connected to a receiver with a DTS decoder.
Disc Subtitle
Disc Menu
Rating
Password
TV Aspect
Menu Language
TV Output Select
Pseudo PAL
Digital Audio Output
Disc Audio
DOLBY
DIGITAL
/PCM
Stream/PCM
PCM
Disc Subtitle
Disc Menu
Rating
Password
TV Aspect
Menu Language
TV Output Select
Pseudo PAL
Digital Audio Output
Disc Audio
DOLBY
DIGITAL
/PCM
Stream/PCM
PCM
1,2
96 kHz Linear
PCM DVD
PCM PCM PCM
DTS DVD DTS Bit Stream No Output Audio Output
Dolby Digital DVD Dolby Digital Bit
Stream
Dolby Digital Bit
Stream
PCM
MPEG DVD MPEG Bit Stream PCM PCM
Audio CD PCM PCM PCM
DTS Audio CD DTS Bit Stream DTS Bit Stream DTS Bit Stream
Playback Disc
OUTPUT
Stream / PCM Dolby Digital /
PCM
PCM only