Filter
Top Products
ENGLISH
FRANÇAISDEUTSCHNEDERLANDSESPAÑOL
ITALIANO
PORTUGUÊS
SVENSKA
27
SELECTING AUDIO
Each DVD disc has a variety of audio output options. Set the player’s digital audio output according to the
type of audio system you use.
1 From the drop-down menu of the OSD screen, press the navigation keys to select ‘Audio’ and press
ENTER on the remote.
2 Using the navigation keys to select the desired output press ENTER on the remote to store your
selection.
‘Analogue On’ ‘Analogue Off’
Digital Out = 48 K ‘Digital Out’ = ‘Auto’
‘Digital Out’ = ‘48 K’
‘Digital Out’ = ‘96 K’
NOTES
If an active digital audio output signal is supplied to a receiver or other equipment without a
corresponding digital decoding capability, a very loud noise may be produced which could
permanently damage the speakers.
The DTS DVD disc sound is played back only when the DVD player is connected to a receiver with a
DTS decoder.
ON HANDLING DISCS
• Do not touch the playback side of the disc.
• Do not attach paper or tape to discs. To do so may cause the discs to jam inside the machine
ON CLEANING DISCS
• Fingerprints and dust on the disc cause picture and sound deterioration. Wipe the disc from the
centre outward with a soft cloth. Always keep the disc clean.
• If you cannot wipe off the dust with a soft cloth, wipe the disc lightly with a slightly moistened soft
cloth and finish with a dry cloth wiping from the centre outward, not in a spiral rotation.
• Do not use any type of solvents such as thinner, benzene, commercially available cleaners or anti-
static spray for vinyl LPs. They may damage the disc.
• The S570’s OSD may display “ERROR: DISC MINOR - CLEAN ME”. If it does, clean the disc as
mentioned above.
ON STORING DISCS
• Do not store discs in a place subject to direct sunlight or near heat sources.
• Do not store discs in places subject to moisture and dust such as a bathroom or near a humidifier.
• Store discs vertically in a case. Stacking or placing objects on discs outside of their case may cause warping.
ABOUT THIS OWNER’S MANUAL
This owner’s manual explains the basic instructions of this S570. Some DVD/VCD/CD media have
functions that may not be explained in this owner’s manual. Therefore, some instructions may differ from
the S570 owner’s manual, and there may be extra instructions. In this case, follow the instructions
displayed on the media package or displayed on the OSD during operation. The following responses
means the function explained in this owner’s manual is not available on that specific media being played.
NOTE
Refer to the owner’s manual of your audio equipment as well. When you connect the S570 to other
equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before
making any connections. The output sound of the S570 has a wide dynamic range. Be sure to adjust
the receiver’s volume to a moderate listening level. Otherwise, the speakers may be damaged by a
sudden high volume sound. Turn off the receiver before you connect or disconnect the S570’s power
cord. If you leave the receiver power on, the speakers may be damaged.
INITIAL SETUP SETTINGS
NOTES ON DISCS
Reference