NEC E462 Flat Panel Television User Manual


 
English-11English-10
English
Attaching the Base
E322 / E422 / E462 E552
1� Place the display face down on a soft and at surface to prevent
scratching and damage�
2� Carefully align the base to the stand and fasten the screws with a cross-
head screwdriver�
CAUTION: The base of the stand is very heavy� Install with care to avoid injury
such as dropping the base onto one's foot�
Place The Display On A Solid Surface
Ensure that the LCD display is
placed in a position to allow free ow
of air� Do not cover the ventilation
openings on the back cover� Do not
place the display near any open
ames. Do not allow the display to
be placed in an environment where
it can be exposed to heat, direct
sunlight, or rain and water� Do not
expose the equipment to any liquid�
Antenna Connection
Unless your LCD display is connected
to a cable TV system or to a centralized
antenna system, a good outdoor color
TV antenna is recommended for best
television performance� However, if you
are located in an exceptionally good
signal area that is free from interference
and multiple image ghosts, an indoor
antenna may be sufcient.
When using a 75-Ohm coaxial cable system, connect the CATV coaxial cable
to the AIR/CABLE (75-Ohm) terminal� Or if you have an antenna, connect the
coaxial cable to the same AIR/CABLE terminal�
Min
1 m