Filter
Top Products
15
Operations in the Picture-in-picture mode
To move the position of the sub screen, press the cursor
ᮤ
or
ᮣ
button.
To change the size of the sub screen, press the
ᮢ
button.
VIDEO1 RGB/PC1
A
B
VIDEO1 RGB/PC1
A
B
VIDEO1 RGB/PC1
A
B
VIDEO1 RGB/PC1
A
B
ᮢ button
ᮢ button
ᮢ button
ᮢ button
To make the desired picture active, press the ACTIVE
SELECT button.
ACTIVE
SELECT
button
VIDEO1 RGB/PC2
A
B
VIDEO1 RGB/PC2
A
B
A
B
VIDEO1 RGB/PC2
VIDEO1
A
B
RGB/PC2
Bottom Left Bottom Right
ᮤ
button
ᮣ
button
ᮣ
button
ᮤ
button
Top Right
ᮤ
button
ᮣ
button
ᮣ
button
ᮤ
button
Top Left
VIDEO1 RGB/PC1
A
B
VIDEO1 RGB/PC1
A
B
Selecting the input signals to be displayed
1. Press the ACTIVE SELECT button to make the desired
picture active.
2. Press the PC/RGB, VIDEO1, 2, 3, or DVD/HD1, 2, 3
button to change the selection of the input signal.
The INPUT SELECT button on the monitor can also be
used to change the selection.
Zooming up pictures
1. Press the ACTIVE SELECT button to make the desired
picture active.
2. Use the ZOOM ( or ) button to enlage the picture.
For details, see “DIGITAL ZOOM” on page 11.
Adjusting the OSM controls
1. Press the ACTIVE SELECT button to make the desired
picture active.
2. Press the MENU/ENTER button to display the MAIN
MENU.
3. Adjust the setting to your preference.
For details, see “OSM (On Screen Menu) Controls” on
page 16.
Note:
During enhanced split screen, some functions of OSM
controls are not available.