NEC LCD19WV Flat Panel Television User Manual


 
12
Specifi cations
Monitor LCD19WV Notes
Specifi cations Monitor
LCD Module Diagonal: 19.0 inch Active matrix; thin fi lm transistor (TFT)
Viewable Image Size: 19.0 inch liquid crystal display (LCD); 0.285 mm dot
Native Resolution (Pixel Count): 1440 x 900 pitch; 300cd/m
2
white luminence;
1000:1 contrast ratio, typical;
Time
5ms response
Input Signal Video: ANALOG 0.7 Vp-p/75 Ohms
Sync:Separate sync TTL Level (Positive/Negtive)
Display Colors Analog input:
16.7M Depending on display card used.
Maximum Left/right: 80°/80° (CR>10)
Viewing Angles Up/Down: 75°/85° (CR>10)
Synchronization Horizontal: 30.0 kHz to 83.0 kHz Automatically
Range Vertical: 55 Hz to 75 Hz Automatically
Resolutions Supported 720 x 400: at 70 Hz
Some systems may not support
640 x 480: 60 Hz to 75 Hz
all modes listed.
800 x 600: 56 Hz to 75 Hz
832 x 624: at 75 Hz
1024 x 768: 60 Hz to 75 Hz
1152 x 864: at 75Hz
1280 x 768: at 60 Hz
1280 x 960: at 60Hz
1280 x 1024: 60 Hz to 75 Hz
1440 x 900: at 60Hz..................................
NEC DISPLAY SOLUTIONS cites
recommended resolution at 60 Hz for
optimal display performance
Active Display Area Horizontal :
410.4 mm/16.2 inches
Vertical :
256.5 mm/10.1 inches
Power Supply
100-240
V
- 50/60 Hz
Current Rating 0.75-0.4A/100-240V
Dimensions
440.0mm (W) x 363.0mm (H) x 210.0mm (D)
17.3 inches (W) x 14.3 inches (H) x 8.3 inches (D)
Weight 4.5 kg
9.9 lbs
Environmental Considerations
Operating Temperature: 5°C to 35°C/41°F to 95°F
Humidity: 30% to 80%
Altitude: 0 to 12,000 Feet
Storage Temperature: -10°C to +60°C/14°F to 140°F
Humidity: 10% to 85%
Altitude: 0 to 40,000 Feet
*
1
Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is
normal and necessary for all current fl at panel technologies when displaying non-native resolutions full screen. In fl at panel technologies, each dot on
the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done.
NOTE: Technical specifi cations are subject to change without notice.
Analog and
Digital Input: