Filter
Top Products
E – 15
Switching operation mode between computer and projector
The three shaded buttons shown on the drawing work as a computer mouse in the Computer mode.
In the Computer mode the PJ button is not lit.
• When the MENU button is pressed, the PJ button lights red to indicate that you are in the Projector mode, which allows the projector menu
operation using the three buttons.
• When the POINTER button is pressed, the PJ button lights red to indicate that you are in the Projector mode and that the SELECT ▲, ▼,
ᮤ
,
ᮣ
button works as a moving button for the POINTER or magnified image.
• If no buttons are pressed within 10 seconds, the PJ button's light goes out to indicate that you are in the Computer mode. To enable the projector
menu operation again, press the PJ button to light red. To move the pointer or a magnified image again, turn off the pointer and then turn on the
pointer (press the POINTER button two times).
• When the PJ button is lit, if you want to use the mouse function immediately, press the PJ button to return to the Computer mode (not lit).
Works as the Select
button on the projector.
M
E
N
U
E
N
T
E
R
C
A
N
C
E
L
PJ
FOCUS ZOOM
OFF
VIDEO
AUTO ADJ.
S-VIDEO RGB1 RGB2
LASER
ON
VOLUME
SHIFT
HELP
POINTER
KEYSTONE
MAGNIFY
FREEZE
PIC-MUTE
PC CARD
SLIDE
FOLDER
SLIDE
LIST
SELECT
POWER
M
E
N
U
E
N
T
E
R
C
A
N
C
E
L
FOCUS ZOOM
OFF
VIDEO
AUTO ADJ.
S-VIDEO RGB1 RGB2
LASER
ON
VOLUME
SHIFT
HELP
POINTER
KEYSTONE
MAGNIFY
FREEZE
PIC-MUTE
PC CARD
SLIDE
FOLDER
SLIDE
LIST
SELECT
POWER
PJ
Not lit
Works as a mouse for your
computer.
Works as a right-click button
for your computer.
Works as a left-click button for
your computer.
Lit red
Works as the Enter
button on the projector.
Works as the Cancel
button on the projector.
During Computer mode:
During Computer mode by pressing the ENTER button for 1.5 sec-
onds or more then releasing, the drag mode is set and the drag opera-
tion can be performed simply by pressing the SELECT (▲, ▼,
ᮤ
,
ᮣ
)
(mouse) button. To cancel the drag mode, press the ENTER (left click)
button again or press the CANCEL (right click) button.