Filter
Top Products
16
ENGLISH
Sound Control
You can select your preferred sound setting; Flat, Music,
Movie or Speech and you can also adjust the sound
frequency of equalizer, balance. If you switch AVL to on,
the set automatically keeps on an equal volume level even
if you change programmes.
1. Press the MENU button.
2. Select the Sound menu.
Then press the VOLÏq button.
3. Press the PRxy button to select the desired
sound item; Equalizer, Balance, AVL or Surround.
4. Press the VOLÏq button to make desired
adjustment.
5. At Equalizer selection, press the PRxy button to
select your preferred setting ; Flat, Music, Movie,
Speech or User.
To set the Equalizer User.
a. Select User by pressing the PRxy button.
b. Select a sound band by pressing the VOLÏq button.
c. Make appropriate sound level with the PRxy button.
d. Press the MENU button to return to preceding menu
and the TV/AV button to return to normal TV viewing.
6. Select the Balance menu and adjust the balance of
speakers.
7. Select the AVL(Automatic Volume Leveler) menu On or Off.
8. Select the Surround menu On or Off.
Auto Sound Control
* The sound Flat, Music, Movie and Speech are programmed for optimum
reproduction at the factory and cannot be changed.
SSM (Sound Status Memory)
1. Press the SSM button.
2. Press the SSM button repeatedly to select.
Each press of the button changes the screen display as below.
Flat ؋ Music ؋ Movie ؋ Speech ؋ User
POWER
MENU TV/AV
PR
OK
PR
VOL
VOL
TV/PC
SLEEP
TEXT/MIX
UPDATE TIME REVEAL HOLD
Q.VIEW LIST
PSM SSM
I/II
123
456
789
*
*
0
NS-201
ƇƉ 5-6=<>)>
Equalizer
Flat
Music
Movie
Speech
User
ƇƉ ȖȘ 5-6=<>)>
Sound
Equalizer Ș
Balance 0
AVL Off
Surround Off
3Pb
17
Other functions
TV, COMPONENT, VIDEO and S-VIDEO modes
(You can’t set PC mode in this menu. Use the TV/AV or
TV/PC mode.)
External equipment inputs: VIDEO or S-VIDEO mode are
used for video devices like VCRs, DVDs, etc.),
COMPONENT, is used for component type devices.
Note : If a VCR is connected to the antenna jack, use TV
mode. See External Equipment Connection section.
1. Press the MENU button.
2. Select the Special menu.
3. Press the PRxy button to select Input.
4. Press the VOLÏq button to select TV, COMPONENT,
VIDEO and S-VIDEO.
COMPONENT : Device connected to the COMPONENT
INPUT.
VIDEO : VIDEO device connected to the TV's VIDEO Input.
S-VIDEO : S-VIDEO device connected to the TV's S-
VIDEO Input.
To return to TV mode, press the TV/AV buttons repeatedly.
Alternatively you can select the TV, COMPONENT, VIDEO,
S-VIDEO or PC mode by pressing the TV/AV button.
Auto sleep
If you select Auto sleep On the set will automatically
switch itself to standby mode approximately ten minutes
after a TV Channel stops broadcasting.
1. Repeatedly press the MENU button to select the
Special menu.
2. Press the PRxy button to select Auto sleep.
3. Press the VOLÏq button to select On.
4. Press the TV/AV button to return to normal TV
viewing.
Blue back
Programme without a program signal appear in blue.
POWER
MENU TV/AV
PR
OK
PR
VOL
VOL
TV/PC
SLEEP
TEXT/MIX
UPDATE TIME REVEAL HOLD
Q.VIEW LIST
PSM SSM
I/II
123
456
789
*
*
0
NS-201
ƇƉ ȖȘ 5-6=<>)>
Special
Input TV
Auto Sleep Off
Blue back Off